CGS Serge voltage controlled gain cell: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
No edit summary |
||
| Line 44: | Line 44: | ||
== Setup == |
== Setup == |
||
[[File:cgs_schem_cgs108_setup.gif|thumb|center|369px]] |
[[File:cgs_schem_cgs108_setup.gif|thumb|center|369px]] |
||
To correctly adjust the CGS108, it needs to be wired into the circuit shown above. It can |
To correctly adjust the CGS108, it needs to be wired into the circuit shown above. It can easily be lashed up on a piece of [[breadboard|solderless protoboard/breadboard]]. |
||
A scope is connected to the output. The scope is set to DC, and the beam centered on the screen. Vertical amplification can be set at 2V or 5V per division, and can be adjusted as needed to keep the trace on the screen. |
A scope is connected to the output. The scope is set to DC, and the beam centered on the screen. Vertical amplification can be set at 2V or 5V per division, and can be adjusted as needed to keep the trace on the screen. |
||