CGS XOR/XNOR logic (previous version): Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
|||
Line 26:
When inserting ICs into sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.
== Notes ==▼
* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.▼
== Parts list ==
Line 64 ⟶ 61:
| CGS54 PCB||align=right|1
|}
▲=== Notes ===
▲* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.
== See also ==
| |||