CGS delay development board: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
(→Notes) |
|||
Line 104: | Line 104: | ||
=== Notes === |
=== Notes === |
||
* There are some capacitors marked as high precision in the app. note, and on the circuit diagram above. I suggest using 5% mylar capacitors or better (styrene, poly prop, poly carb, 1%, 2%, etc.) in these positions. Match them if you have a capacitance meter. |
|||
* PCB is 6" x 2" with 3mm mounting holes 0.15" in from the edges. |
* PCB is 6" x 2" with 3mm mounting holes 0.15" in from the edges. |
||