m
Text replacement - " (archived) by Ken Stone, 2007, with permission of the author" to " by Ken Stone, 2007, with permission of the author - archived"
(Created page with "thumb|center|200px| While '''CGS69''' the '''CGS dev-mod gate/trigger block''' development module does replicate the CGS gate to trigger con...") |
m (Text replacement - " (archived) by Ken Stone, 2007, with permission of the author" to " by Ken Stone, 2007, with permission of the author - archived") |
||
| (5 intermediate revisions by the same user not shown) | |||
Line 26:
If you need to increase the output swing of the buffers, change the values of the 1k8/1k resistors used in the divider.
Around the edge of the board are rows of pads suitable for adding headers to allow dev-blocks to be linked together using the [[CGS dev-mod joiner|CGS72 joiner]] or plain old pin header jumpers. Apart from the power rails, these are not assigned, so as to allow maximum versatility. You will need to link these pads to the inputs and outputs of the circuit blocks as required.
{| class="wikitable"
Line 89:
=== Notes ===
* PCB 2" x 2" with four 3mm mounting holes 0.15" in from the edges.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 95 ⟶ 98:
== References ==
* ''[https://web.archive.org/web/
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
[[Category:CGS
[[Category:CGS general and accessories]]
| |||
