no edit summary
(Created page with "thumb|center|200px| While '''CGS69''' the '''CGS dev-mod gate/trigger block''' development module does replicate the CGS gate to trigger con...") |
No edit summary |
||
Line 26:
If you need to increase the output swing of the buffers, change the values of the 1k8/1k resistors used in the divider.
Around the edge of the board are rows of pads suitable for adding headers to allow dev-blocks to be linked together using the [[CGS dev-mod joiner|CGS72 joiner]] or plain old pin header jumpers. Apart from the power rails, these are not assigned, so as to allow maximum versatility. You will need to link these pads to the inputs and outputs of the circuit blocks as required.
{| class="wikitable"
| |||
