→Methods of joining dev blocks, and the use of the CGS72 board.
(Created page with "thumb|center|200px| '''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together. == Methods of joining dev blocks,...") |
|||
Line 2:
'''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together.
==
[[File:cgs_photo_cgs72_01.jpg|thumb|center|236px|Standard 0.1 header jumpers as used in computers etc.. When the boards are pushed up against each other, the spacing between their rows of pins is 0.1"]]
[[File:cgs_photo_cgs72_02.jpg|thumb|center|400px|CGS72 fitted with a 28 pin dual row 0.1" socket, used from above. Note that the mounting holes of the CGS72 line up with the mounting holes of the dev blocks it is joining.]]
[[File:cgs_photo_cgs72_03.jpg|thumb|center|224px|CGS72 fitted with a 28 pin dual row 0.1" socket, used from below.
[[File:cgs_photo_cgs72_04.jpg|thumb|center|600px|The pins fitted to the dev block are modified wire-wrap headers and have as much length below the PCB as they do above.]]
▲[[File:cgs_photo_cgs72_03.jpg|thumb|center|224px|CGS72 fitted with a 28 pin dual row 0.1" socket, used from below. ]]
== Parts list ==
| |||
