CGS dome filter: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
m (Text replacement - " - archived" to " - archived")
Tag: Manual revert
(Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3)
 
Line 3: Line 3:
'''CGS45''' the '''CGS dome filter''' is a 90° phase difference network, as used in frequency shifters. It is not a project in itself, and will be of no use to most people. I designed this board simply because I needed some dome filters for my own experimentation.
'''CGS45''' the '''CGS dome filter''' is a 90° phase difference network, as used in frequency shifters. It is not a project in itself, and will be of no use to most people. I designed this board simply because I needed some dome filters for my own experimentation.


The circuit is based on the work of, and Copyright by Bernie Hutchins. It was presented in Electronotes 83, in Nov 1977. The implementation is very similar to that of the [http://www.jhaible.info/fs1a/fs1a.html JH. FS-1A Frequency Shifter] by [[Jürgen Haible]] for his frequency shifter. Do not expect either of these people to help you with the construction of this PCB.
The circuit is based on the work of, and Copyright by Bernie Hutchins. It was presented in Electronotes 83, in Nov 1977. The implementation is very similar to that of the [https://web.archive.org/web/20190502175530/http://www.jhaible.info/fs1a/fs1a.html JH. FS-1A Frequency Shifter] by [[Jürgen Haible]] for his frequency shifter. Do not expect either of these people to help you with the construction of this PCB.


While untested, the module should work on +/-12 volts.
While untested, the module should work on +/-12 volts.