m
Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"
m (Rescuing 1 sources and tagging 0 as dead. #IABot (v2.0beta15)) |
m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived") |
||
(3 intermediate revisions by the same user not shown) | |||
Line 58:
=== Notes ===
* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 64 ⟶ 67:
== References ==
* ''[https://web.archive.org/web/
== External links ==
Line 72 ⟶ 75:
* [https://web.archive.org/web/20181025065240/http://www.elby-designs.com/webtek/cgs/cgs56/cgs56_gatecon.html CGS56 Gate Converter], revision 1.1, Elby Designs
[[Category:CGS
|