CGS voltage controlled divider: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
m (Text replacement - "w_/http" to "/http") |
m (add CC-BY-NC (via JWB)) |
||
Line 155: | Line 155: | ||
* A 10 to 22 ohm resistor can be used instead of a ferrite bead. If you don't care about power-rail noise, just use a link instead. |
* A 10 to 22 ohm resistor can be used instead of a ferrite bead. If you don't care about power-rail noise, just use a link instead. |
||
* {{font color|red|If using a Motorola chip here, make sure it is the MC14024 and not an MC4024, which is entirely the wrong chip.}} |
* {{font color|red|If using a Motorola chip here, make sure it is the MC14024 and not an MC4024, which is entirely the wrong chip.}} |
||
== CC-BY-NC == |
|||
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. |
|||
== See also == |
== See also == |