CGS wave multiplier v1: Difference between revisions

m
Text replacement - " (archived) by Ken Stone, 2002, with permission of the author" to " by Ken Stone, 2002, with permission of the author - archived"
(Created page with "thumb|center|600px The idea for '''CGS29''' the '''CGS wave multiplier''' project came from the fabled middle section of the Serge...")
 
m (Text replacement - " (archived) by Ken Stone, 2002, with permission of the author" to " by Ken Stone, 2002, with permission of the author - archived")
 
(5 intermediate revisions by the same user not shown)
Line 113:
! colspan="2" align=center|Misc
|-
| Ferrite Beadbead (or 10R resistor)||align=right|2
|-
| 0.156 4 pin connector||align=right|1
Line 122:
=== Notes ===
* A 10 to 22 ohm resistor can be used instead of the ferrite bead. If you don't care about power-rail noise, just use a link instead.
 
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
 
== See also ==
* [[CGS wave multiplier v1|Wave Multiplier version 1]]
* [[CGS wave multiplier v1 r2|Wave Multiplier version 1 revision 2]]
* [[CGS wave multiplier|Wave Multiplier version 2.0/version 2.1]]
Line 132 ⟶ 134:
 
== References ==
* ''[https://web.archive.org/web/20180209234737fw_20180209234737f/http://www.cgs.synth.net:80/modules/cgs29_wave_multiplier_v1.html Wave Multiplier for music synthesizers.] - Version 1 documents, for those with original version boards.'' (archived) by Ken Stone, 2002, with permission of the author - archived
 
== External links ==
Line 138 ⟶ 140:
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
 
[[Category:CGS modularsignal processors]]