Combining 5U MOTM and Synthesizers.com modules in the same cabinet: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
===Height Issues=== |
===Height Issues=== |
||
[[File:74_motmnolip_1.jpg|thumb|right|350px|middle|The MOTM module is straight with no .]]Synthesizers.com and MOTM-format modules are ''technically'' the same height. The real difference is the fact that Synthesizers.com-format modules have a lip on one side. This is to mount the PCB perpendicular to the front panel, simplifying construction and cutting down on hardware cost.<ref>Harmony Central:[http://www.harmonycentral.com/t5/keys-synths-amp-samplers/apparently-i-m-building-synth-modules-now/td-p/8209099 Apparently I'm building synth modules now.]</ref> |
[[File:74_motmnolip_1.jpg|thumb|right|350px|middle|The MOTM module is straight with no lip.]]Synthesizers.com and MOTM-format modules are ''technically'' the same height. The real difference is the fact that Synthesizers.com-format modules have a lip on one side. This is to mount the PCB perpendicular to the front panel, simplifying construction and cutting down on hardware cost.<ref>Harmony Central:[http://www.harmonycentral.com/t5/keys-synths-amp-samplers/apparently-i-m-building-synth-modules-now/td-p/8209099 Apparently I'm building synth modules now.]</ref> |
||
[[File:74_motmmindthegap_1.jpg|thumb|right|350px|middle|The red shade highlights the gap left in order to centre the module.]]The mounting holes of MOTM-format modules are also placed at a slightly different vertical height to those on Synthesizer Dot Com modules. This means that if placing a MOTM-format module on the floor of a Synthesizer Dot Com cabinet its mounting holes will not reach the top rail completely. To counter this, make sure that any MOTM-format modules are centered in the rails before drilling mounting holes for them.[[File:74_mountingholes_1.jpg|thumb|right|350px|middle|The MOTM holes are marked in green and Synthesizers.com in red.]] Mark the holes making sure the module is centered and drill the hole with a 1mm or 2mm bit. Then screw in one of the mounting screws to tap the hole before mounting the module. The MOTM mounting holes will be closer to the edge of the rails than the Synthesizers.com ones.[[File:74_happytogether_1.jpg|thumb|right|350px|middle|The two formats mounted in the same case.]] |
[[File:74_motmmindthegap_1.jpg|thumb|right|350px|middle|The red shade highlights the gap left in order to centre the module.]]The mounting holes of MOTM-format modules are also placed at a slightly different vertical height to those on Synthesizer Dot Com modules. This means that if placing a MOTM-format module on the floor of a Synthesizer Dot Com cabinet its mounting holes will not reach the top rail completely. To counter this, make sure that any MOTM-format modules are centered in the rails before drilling mounting holes for them.[[File:74_mountingholes_1.jpg|thumb|right|350px|middle|The MOTM holes are marked in green and Synthesizers.com in red.]] Mark the holes making sure the module is centered and drill the hole with a 1mm or 2mm bit. Then screw in one of the mounting screws to tap the hole before mounting the module. The MOTM mounting holes will be closer to the edge of the rails than the Synthesizers.com ones.[[File:74_happytogether_1.jpg|thumb|right|350px|middle|The two formats mounted in the same case.]] |
||