Combining 5U MOTM and Synthesizers.com modules in the same cabinet: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
Line 75: | Line 75: | ||
:Modcan sells +/- 15v supplies<ref name="mw1739">Muff's Modules & More:[http://www.muffwiggler.com/forum/viewtopic.php?t=1739 Power distribution - updated]</ref> |
:Modcan sells +/- 15v supplies<ref name="mw1739">Muff's Modules & More:[http://www.muffwiggler.com/forum/viewtopic.php?t=1739 Power distribution - updated]</ref> |
||
Synthesizers.com use a 6 way [[MTA |
Synthesizers.com use a 6 way [[MTA]] 0.100" connector to get power from the power supply to modules. Power is distributed from the power supply via a power harness which contains a number of these connectors. They sell 2 models: the small power harness has 20, the large has 40.<ref name="mw1739"/> |
||
MOTM Synthesis Technology use a 4 way |
MOTM Synthesis Technology use a 4 way MTA 0.156" connector – those that only need +/- 15v. These are the same power connectors that Frac and Wiard 300 series module use. Some of the newer modules, that also require 5v, use a 6 pin connector. Power is distributed from the power supply via power distribution boards. There are two main versions – one with only 4 pin connections (i.e. +/- 15v only) and one with a mix of 4 and 6 pin connectors (providing +/-15v and 5v).<ref name="mw1739"/> |
||
Modcan and Cyndustries have the same type of connector as MOTM to distribute power to modules except they only use a 3 pin version which provides +/-15v only. Power is distributed from the power supply via a distribution board. The Modcan one is completely compatible with Cyndustries modules.<ref name="mw1739"/> |
Modcan and Cyndustries have the same type of connector as MOTM to distribute power to modules except they only use a 3 pin version which provides +/-15v only. Power is distributed from the power supply via a distribution board. The Modcan one is completely compatible with Cyndustries modules.<ref name="mw1739"/> |