Electronotes/AN-23 - The CA3080 as a voltage-controlled resistor: Difference between revisions
Electronotes/AN-23 - The CA3080 as a voltage-controlled resistor (view source)
Revision as of 16:43, 1 September 2020
, 3 years agono edit summary
No edit summary |
No edit summary |
||
(7 intermediate revisions by the same user not shown) | |||
Line 1:
[[File:AN23 fig 1a.jpg|thumb|right|250px|Fig. 1a.jpg]][[File:AN23 fig 1b.jpg|thumb|right|250px|Fig. 1b.jpg]][[File:AN23 fig 1c.jpg|thumb|right|250px|Fig. 1c.jpg]][[File:AN23 fig 1d.jpg|thumb|right|250px|Fig. 1d.jpg]][[File:AN23 fig 1e.jpg|thumb|right|250px|Fig. 1e.jpg]][[File:AN23 fig 2a.jpg|thumb|right|250px|Fig. 2a.jpg]][[File:AN23 fig 2b.jpg|thumb|right|250px|Fig. 2b.jpg]]In [[Electronotes/AN-22|AN-22]], we looked at the [[CA3080]] [[
<math>\frac{V_{diff}}{I_{out}} = \frac{1}{(19.2 \cdot I_{c
We can thus look at the circuit of Fig. 1a as a form of a voltage-controlled resistor. If we rewrite equation (1) a little we get:
Line 13:
<math>I_{out} = I_{c} \cdot \frac{V_{in}}{23.7} = \frac{V_{in}}{R_{eq}}</math>
which is the same thing we had above. But here the current is drawn from the input (<math>I_{in} = I_{out}</math>) so the VCR looks like a resistor to ground, as seen in Fig. 2b. We can thus use this sort of VCR to implement the [[high pass filter|high-pass filter]] structure shown in Fig. 2c. The implementation is shown in Fig. 2d, and the 3dB frequency is <math>\frac{
<div><ul>
<li style="display: inline-block;">[[File:AN23 fig 2c.jpg|thumb|right|250px|Fig. 2c.jpg]]</li>
Line 39:
<math>I = (V_{2}-V_{1})(\frac{1}{200k}+\frac{I_{c}}{47.3})</math>
Thus, as the current <math>I_{c}</math> is increased, the effective resistance goes down, starting from a value of 200k (or whatever attenuator is used). For a completely linear system, the circuit of Fig. 5 can be used to get rid of the
== References ==
*
[[Category:Electronotes Application Notes]]
[[Category:CA3080]]
[[Category:OTA]]
|