Eurorack panel components: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
|||
| Line 53: | Line 53: | ||
For spacing between 1/4" jacks, a 30 mm x 17 mm center to center grid is comfortable for most people. Most use wide vertical spacing and narrow horizontal spacing. However the opposite allows for placing legends on the side. When marked above or below these are only visible when no plugs are inserted.<ref>Minimum spacing between 1/4" jacks on DOTCOM modules.. by Andre Majorel on SDIY email list, 18 May 2013</ref> |
For spacing between 1/4" jacks, a 30 mm x 17 mm center to center grid is comfortable for most people. Most use wide vertical spacing and narrow horizontal spacing. However the opposite allows for placing legends on the side. When marked above or below these are only visible when no plugs are inserted.<ref>Minimum spacing between 1/4" jacks on DOTCOM modules.. by Andre Majorel on SDIY email list, 18 May 2013</ref> |
||
Behind the panel leave 10 mm clear from top and bottom edges for panel mounted components to clear the rails.<ref name="stds">[https://www.muffwiggler.com/forum/viewtopic.php?t=45878 |
|||
Want to create a eurorack panel, need to know standards], Muff Wiggler forum, Nov 2011</ref> |
|||
== Jacks/sockets == |
== Jacks/sockets == |
||