Jumper

Jump to navigation Jump to search

The most common type of jumper is a small plastic tab containing two sockets spaced 0.1 inch (2.5 mm) apart. The jumper fits over and shorts together pins on a header fitted to the PCB. It acts as a low-cost substitute for a switch, where the connection needs to be made only rarely made. A DIP switch performs the same function. There is no standard schematic symbol to represent a jumper.[1]

See also

References

  1. ^ Make: Encyclopedia of Electronic Components Volume 1: Resistors, Capacitors, Inductors, Switches, Encoders, Relays, Transistors by Charles Platt, Publisher: Maker Media Inc, 2012, ISBN 1449333893

External links

Suppliers