→Internal connectors
Line 44:
*[http://synthcube.com/cart/index.php?route=product/search&filter_name=bracket Synthcube]
==Internal connectors==
Do not mix dissimilar metal terminals and headers. The contact resistance will go up with dissimilar metals, causing all sorts of problems.<ref>[http://www.pinrepair.com/connect/ Molex Connectors Explained, as used in Pinball.]</ref>
<!--The Molex KK crimp connector is used in synthesizers by [[CGS]], [[Cyndustries]], [[EFM]], [[Encore Electronics]], [[Metalbox]], [[Oakley Sound Systems]] and [[Synthesis Technology]].<ref>[http://search.retrosynth.com/synth-diy/search/lookit.cgi?-v0503.816 Re: [sdiy] Blacet/Paia power header part number?] by Cynthia Webster, 21 Mar 2005</ref>.--><!-- [[Connectors#5U]]-->===Power===
MOTM modules and power distribution boards are connected using 4-pin [[MTA]]-156 connectors and 18 awg wire.<ref name="mw1739">Muff's Modules & More:[http://www.muffwiggler.com/forum/viewtopic.php?t=1739 Power distribution - updated]</ref> Systems by [[Encore Electronics]] use 4 pin 0.156" [[Molex KK]] connectors, while those from [[Oakley Sound Systems]] use either MTA or Molex KK 0.156" connectors.
| |||