Revision as of 01:33, 4 December 2018 (view source) InternetArchiveBot (talk \| contribs) (Rescuing 1 sources and tagging 0 as dead. #IABot (v2.0beta10ehf1)) ← Older edit		Revision as of 23:00, 19 October 2019 (view source) Rob Kam (talk \| contribs) m (clean up) Newer edit →
Line 6: === Blank panels === 6061 aluminum alloy, T3 or T6 temper, is easy to come by, can be easily worked. Thickness usually ranges between 1.5  mm (0.62") and 2.5  mm (0.12") but see what is standard for the format, e.g. a thickness of 2.28  mm (0.09") for 4U.<ref>[https://www.muffwiggler.com/forum/viewtopic.php?t=86107 What type of aluminium is used for faceplates?], Muff Wiggler forum, June 2013</ref><ref>[https://www.muffwiggler.com/forum/viewtopic.php?t=51475 Aluminum Panel Guage???]</ref> Blank panels can be purchased from: Line 70: === Interconnections === Oakley Sound Systems designs use either MTA-100 or Molex KK 0.1" for board interconnects.<ref>Oakley Sound Systems:[http://www.oakleysound.com/construct.pdf Construction Guide]</ref> {{From Muff Wiggler wiki\|MOTM DIY resources}}▼ == See also == Line 76 ⟶ 75: == References == ▲{{From Muff Wiggler wiki\|MOTM DIY resources}} {{reflist}} * [https://www.muffwiggler.com/forum/viewtopic.php?t=36380&start=all&postdays=0&postorder=asc The 5U DIY Resource Wiki], Muff Wiggler forum

MOTM parts: Difference between revisions

MOTM parts (view source)