PCB layout and design: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
(Rescuing 1 sources and tagging 0 as dead. #IABot (v2.0beta14))
m (clean up)
Line 3: Line 3:
https://en.wikipedia.org/wiki/Reference_designator Standard Device Prefixes
https://en.wikipedia.org/wiki/Reference_designator Standard Device Prefixes
===Best Practices===-->
===Best Practices===-->

{{stub}}
== References ==
== References ==
{{reflist}}
{{reflist}}

== Further reading ==
== Further reading ==
* ''The Circuit Designer's Companion'' by Peter Wilson, Newnes, 2012, ISBN 0-08-097138-5
* ''The Circuit Designer's Companion'' by Peter Wilson, Newnes, 2012, ISBN 0-08-097138-5
Line 12: Line 13:
* ''Fabricating Printed Circuit Boards''' by Jon Varteresian, Newnes, 2002, ISBN 1-878707-50-7
* ''Fabricating Printed Circuit Boards''' by Jon Varteresian, Newnes, 2002, ISBN 1-878707-50-7
* ''Build Your Own Printed Circuit Board'' by Al Williams, Tab, 2003, ISBN 978-0-07-142783-8
* ''Build Your Own Printed Circuit Board'' by Al Williams, Tab, 2003, ISBN 978-0-07-142783-8
* ''[http://www.magazines007.com/emag/pub/PCBD-Nov2013/?page=28 Thermal Design: Still a Process Pinch Point?]'' by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28
* ''[http://www.magazines007.com/emag/pub/PCBD-Nov2013/?page=28 Thermal Design: Still a Process Pinch Point?]'' by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28

==Externallinks ==
==Externallinks ==
=== Video ===
=== Video ===
* [https://youtu.be/R_Ud-FxUw0g EEVblog #1129 - Creating a Nice Readable Schematic]
* [https://youtu.be/R_Ud-FxUw0g EEVblog #1129 - Creating a Nice Readable Schematic]
[[Category:PCB]]
[[Category:PCB]]
{{stub}}