PCB layout and design: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
'''PCB layout design''' is possible with tape and dry transfers, or permanent marker pen however [[Electronic design automation|EDA]] software will offer schematic capture, PCB layout, ERC (electrical rule checks), DRC (design rule checks) and other features, e.g. simulating the circuit with [[SPICE]].<ref>PCB design, [http://www.ladyada.net/library/pcb/software.html Software options], ladyada.net</ref><!-- Wikibooks' Practical Electronics [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout PCB Layout] and [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout/Trace_Current_Capacity Trace Current Capacity]. |
'''PCB layout design''' is possible with tape and dry transfers, or permanent marker pen however [[Electronic design automation|EDA]] software will offer schematic capture, PCB layout, ERC (electrical rule checks), DRC (design rule checks) and other features, e.g. simulating the circuit with [[SPICE]].<ref>PCB design, [http://www.ladyada.net/library/pcb/software.html Software options], ladyada.net</ref><!-- Wikibooks' Practical Electronics [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout PCB Layout] and [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout/Trace_Current_Capacity Trace Current Capacity]. |
||
==Standard device prefixes== |
== Standard device prefixes == |
||
https://en.wikipedia.org/wiki/Reference_designator Standard Device Prefixes |
https://en.wikipedia.org/wiki/Reference_designator Standard Device Prefixes |
||
===Best Practices===--> |
===Best Practices===--> |
||
Line 6: | Line 6: | ||
== References == |
== References == |
||
{{reflist}} |
{{reflist}} |
||
==Further reading== |
== Further reading == |
||
*''The Circuit Designer's Companion'' by Peter Wilson, Newnes, 2012, ISBN |
* ''The Circuit Designer's Companion'' by Peter Wilson, Newnes, 2012, ISBN 0-08-097138-5 |
||
*''[http://frank.harvard.edu/aoe/ The Art of Electronics]'', by Paul Horowitz and Winfield Hill ISBN |
* ''[http://frank.harvard.edu/aoe/ The Art of Electronics]'', by Paul Horowitz and Winfield Hill ISBN 0-521-37095-7, pages 835-852 |
||
*''How to Design and Make Your Own PCBs'' by R. Penfold, Babani, 1983, ISBN |
* ''How to Design and Make Your Own PCBs'' by R. Penfold, Babani, 1983, ISBN 0-85934-096-1 |
||
*''Fabricating Printed Circuit Boards''' by Jon Varteresian, Newnes, 2002, ISBN |
* ''Fabricating Printed Circuit Boards''' by Jon Varteresian, Newnes, 2002, ISBN 1-878707-50-7 |
||
*''Build Your Own Printed Circuit Board'' by Al Williams, Tab, 2003, ISBN |
* ''Build Your Own Printed Circuit Board'' by Al Williams, Tab, 2003, ISBN 978-0-07-142783-8 |
||
*''[http://www.magazines007.com/emag/pub/PCBD-Nov2013/?page=28 Thermal Design: Still a Process Pinch Point?]'' by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28 |
* ''[http://www.magazines007.com/emag/pub/PCBD-Nov2013/?page=28 Thermal Design: Still a Process Pinch Point?]'' by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28 |
||
<!--==Externallinks ==--> |
<!--==Externallinks ==--> |
||
[[Category:PCB]] |
[[Category:PCB]] |
Revision as of 18:51, 3 May 2017
PCB layout design is possible with tape and dry transfers, or permanent marker pen however EDA software will offer schematic capture, PCB layout, ERC (electrical rule checks), DRC (design rule checks) and other features, e.g. simulating the circuit with SPICE.[1]
This article is a stub. You can help the Synth DIY Wiki by expanding it. |
References
- ^ PCB design, Software options, ladyada.net
Further reading
- The Circuit Designer's Companion by Peter Wilson, Newnes, 2012, ISBN 0-08-097138-5
- The Art of Electronics, by Paul Horowitz and Winfield Hill ISBN 0-521-37095-7, pages 835-852
- How to Design and Make Your Own PCBs by R. Penfold, Babani, 1983, ISBN 0-85934-096-1
- Fabricating Printed Circuit Boards' by Jon Varteresian, Newnes, 2002, ISBN 1-878707-50-7
- Build Your Own Printed Circuit Board by Al Williams, Tab, 2003, ISBN 978-0-07-142783-8
- Thermal Design: Still a Process Pinch Point? by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28