Panel (outsourcing): Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
(→FR4) |
(→PCB) |
||
Line 40: | Line 40: | ||
== PCB == |
== PCB == |
||
<!--FR4 or aluminium -->Far cheaper than aluminium, use a [[Printed circuit board|PCB]] fab house to produce 3 mm FR4 panels. Also fiberglass is lighter and stiffer than aluminium. [[BugBrand]]<!-- and Buchla? --> synths panels were manufactured using this method, the copper layer and soldermask to the front, with silk-screened labeling.<ref>[http://www.matrixsynth.com/2007/03/grant-richter-on-cutting-down-modular.html Grant Richter on Cutting Down Modular Costs], Matrixsynth, March 2007</ref><ref>[http://www.bugbrand.co.uk/index.php?main_page=index&cPath=2_21 OldBlue Overview (archive)]</ref> |
{{Main|PCB front panels}}<!--FR4 or aluminium -->Far cheaper than aluminium, use a [[Printed circuit board|PCB]] fab house to produce 3 mm FR4 panels. Also fiberglass is lighter and stiffer than aluminium. [[BugBrand]]<!-- and Buchla? --> synths panels were manufactured using this method, the copper layer and soldermask to the front, with silk-screened labeling.<ref>[http://www.matrixsynth.com/2007/03/grant-richter-on-cutting-down-modular.html Grant Richter on Cutting Down Modular Costs], Matrixsynth, March 2007</ref><ref>[http://www.bugbrand.co.uk/index.php?main_page=index&cPath=2_21 OldBlue Overview (archive)]</ref> PCB front panels need to be designed for normal PCB fabrication. |
||
=== PCB fab houses known to have been used for PCB front panels === |
|||
* [https://www.pcbway.com/ PCBWay] |
|||
* [https://www.pcbcart.com/ Pcbcart] |
|||
* [https://www.seeedstudio.com/ Seeed] |
|||
* [https://oshpark.com/ Oshpark] |
|||
== See also == |
== See also == |