Search results
Jump to navigation
Jump to search
- ...is a thyratron tube. On this tube I used a socket with a tube shield. This blocked interference from both magnetic and light sources. ...4 KB (756 words) - 18:41, 19 July 2022
- ...going voltages reach the output. Any negative going voltages (logic 0) are blocked, and the output held at 0 volts by the pull-down resistor at the output. Th ...7 KB (1,109 words) - 18:42, 19 July 2022
- ...going voltages reach the output. Any negative going voltages (logic 0) are blocked, and the output held at 0 volts by the pull-down resistor at the output. Th ...6 KB (922 words) - 18:42, 19 July 2022
- ...nnected to the second input of each EXOR gate via the 10k resistor will be blocked by the forward biased diode. The output of the counter is then fed via the ...12 KB (2,040 words) - 14:12, 4 March 2023
- ...n of the switch, a HIGH will be transferred through to either F1 or P1, or blocked if the switch is in the center-off position. When any other column is HIGH, ...21 KB (3,706 words) - 14:50, 19 July 2022
- ...nnected to the second input of each EXOR gate via the 10k resistor will be blocked by the forward biased diode. The output of the counter is then fed via the ...9 KB (1,519 words) - 14:50, 19 July 2022