Search results

...f the heater/cathode. This is shown in RED on the schematic. Doing so will reduce the distortion at low input levels. Do not put in both red and blue options ...e gain. Alternately if you wish to increase the gain of the output buffer, reduce the value of the 100k resistor marked "Gain" in RED on the schematic. 10k w ...

...es you, you need to increase the value of the resistor. If it is too dark, reduce the resistor. Only old, low mcd LEDs will need a low value resistor. I pref ...to their appropriate pad. I folded the tags down on the banana sockets to reduce the required board mounting height.<br>More wire clippings are used to conn ...

...is to use empty ref tags, which have a slash at the end. Although this may reduce redundant work, please be aware that if a future editor removes the first r ...

...n red limits the response rate of the VCF. If you wish a quicker response, reduce or omit it. ...

...know for certain that the ratio is too great, the ratio can be reduced to reduce the amplification of any effects pedal noise. For example, if an effects pe ...

...know for certain that the ratio is too great, the ratio can be reduced to reduce the amplification of any effects pedal noise. For example, if an effects pe ...