Search results

...omponents by looking at them. If you cannot read resistor colour codes, or if you cannot tell one component apart from another without it being in a labe If you don't have the skills consider buying a pre-built synthesizer.<ref name ...

'''CGS63''' the '''CGS power supply delay''' is a support module of sorts. Due to rather heavy usage of bypass capacitors in the synt If modules were brought on-line in groups instead of all at once, the power-up ...

...due to over etching. Take this opportunity to sand the edges of the board if needed, removing any splinters or rough edges. (With the boards supplied by ...ed as normal, starting with the resistors first, followed by the IC socket if used, then moving onto the taller components. ...

...nd of the audio range, so that most of the audio at the input now passes. If the output of an [[envelope generator]] is presented to the control input, ...he rub - the more you attenuate the bleed - this can only be heard audibly if you use the LPG in passages where the LPG processed event is the only sound ...