XY controller: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
(Rescuing 2 sources and tagging 0 as dead. #IABot (v2.0beta10ehf1))
m (clean up)
Line 1: Line 1:
The [[XY controller]] is a joystick used on some synthesizers to simultaneously and independently control two parameters such as [[pitch bend]] and [[modulation]].<ref>The studio musician's jargonbuster by Godric Wilkie, Musonix, 1997, ISBN 0-9517214-2-9</ref><ref>The complete synthesizer – A comprehensive guide by David Crombie, Omnibus Press, 1986, ISBN 0-7119-0701-3</ref>
The '''XY controller''' is a joystick used on some synthesizers to simultaneously and independently control two parameters such as [[pitch bend]] and [[modulation]].<ref>The studio musician's jargonbuster by Godric Wilkie, Musonix, 1997, ISBN 0-9517214-2-9</ref><ref>The complete synthesizer – A comprehensive guide by David Crombie, Omnibus Press, 1986, ISBN 0-7119-0701-3</ref>


== Moog 959 X-Y Controller ==
== Moog 959 X-Y Controller ==
The [[Moog ]]959 X/Y controller consists of two audio taper [[Allen Bradley type J pots|AB type J 10K pots]] and voltage limiting resistors. When centered the pot is at zero volts and travel is about 15° to either side. Care is needed to set it up so that at full swing the power rails are not shorted. The rotational resistance of the pots dictate the feel of the stick. The shafts of the two pots are simply connected by one L bracket.<ref>[http://dropmix.xs4all.nl/pipermail/synth-diy/2016-January/047788.html XY controller build?], SDIY email list, Jan 2016</ref>
The [[Moog]] 959 X/Y controller consists of two audio taper [[Allen Bradley type J pots|AB type J 10K pots]] and voltage limiting resistors. When centered the pot is at zero volts and travel is about 15° to either side. Care is needed to set it up so that at full swing the power rails are not shorted. The rotational resistance of the pots dictate the feel of the stick. The shafts of the two pots are simply connected by one L bracket.<ref>[http://dropmix.xs4all.nl/pipermail/synth-diy/2016-January/047788.html XY controller build?], SDIY email list, Jan 2016</ref>


{{stub}}
== References ==
== References ==
{{reflist}}
{{reflist}}


== Further reading ==
== Further reading ==
* Synthesizer Basics by Dean Friedman, Amsco Music, 1985, ISBN 0-8256-2409-6, p.63
* Synthesizer Basics by Dean Friedman, Amsco Music, 1985, ISBN 0-8256-2409-6, p.&nbsp;63


== External links ==
== External links ==
Line 22: Line 21:
[[Category:Components]]
[[Category:Components]]
[[Category:Controllers]]
[[Category:Controllers]]
{{stub}}

Revision as of 12:21, 19 October 2019

The XY controller is a joystick used on some synthesizers to simultaneously and independently control two parameters such as pitch bend and modulation.[1][2]

Moog 959 X-Y Controller

The Moog 959 X/Y controller consists of two audio taper AB type J 10K pots and voltage limiting resistors. When centered the pot is at zero volts and travel is about 15° to either side. Care is needed to set it up so that at full swing the power rails are not shorted. The rotational resistance of the pots dictate the feel of the stick. The shafts of the two pots are simply connected by one L bracket.[3]

References

  1. ^ The studio musician's jargonbuster by Godric Wilkie, Musonix, 1997, ISBN 0-9517214-2-9
  2. ^ The complete synthesizer – A comprehensive guide by David Crombie, Omnibus Press, 1986, ISBN 0-7119-0701-3
  3. ^ XY controller build?, SDIY email list, Jan 2016

Further reading

  • Synthesizer Basics by Dean Friedman, Amsco Music, 1985, ISBN 0-8256-2409-6, p. 63

External links

Suppliers