Atari Punk Console: Difference between revisions
mNo edit summary |
|||
| (15 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:APC with 2 555 (pin out) and bridge added.png|thumb|400px|Schematic for a two 555 implementation of the Atari Punk Console]] |
[[File:APC with 2 555 (pin out) and bridge added.png|thumb|400px|Schematic for a two 555 implementation of the Atari Punk Console]] |
||
| ⚫ | The '''Atari Punk Console''' (commonly shortened to '''APC''') is a popular circuit that utilizes two [[555 timer]] ICs or a single 556 dual timer IC. The circuit is a simple DIY noisemaker circuit that is relatively inexpensive and easy to build, easily adaptable and is configurable in many ways. It has been built into a wide variety of enclosures. Its flexibility has led to wide popularity. It is often suggested as a good circuit to build for beginners. |
||
| ⚫ | |||
== History == |
|||
| ⚫ | The original circuit, called a "Sound Synthesizer", was published in a Radio Shack booklet: "Engineer's Notebook: Integrated Circuit Applications" in 1980<ref name="enica">[http://www.jameco.com/jameco/pressroom/punk.html Engineer's Notebook: Integrated Circuit Applications], Jameco</ref> and later called "Stepped Tone Generator" in "Engineer's Mini-Notebook – 555 Circuits" by its designer, [https://en.wikipedia.org/wiki/Forrest_Mims Forrest Mims].<ref name="emn">[https://web.archive.org/web/20130822030621/http://feenelcaos.org/wp-content/upload/Forrest-Mims-engineers-mini-notebook-555-timer-circuits-ra.pdf Mini-Notebook], Radio Shack - archived</ref> It was named "Atari Punk Console" (APC) by Kaustic Machines because its "low-fi" sounds resemble classic Atari console games from the 1980s, with a square wave output similar to the [https://en.wikipedia.org/wiki/Atari_2600 Atari 2600]. Kaustic Machines added a -4db line level output to the circuit which was originally designed to drive a small 8-ohm speaker. |
||
== How it works == |
|||
Atari Punk console is an astable square wave [[oscillator]] driving a monostable oscillator that creates a single (square) pulse. There are two controls, one for the frequency of the oscillator and one to control the volume. The controls are usually [[potentiometers]] but the circuit can also be controlled by light, temperature, pressure etc. by replacing a potentiometer with a suitable sensor (e.g., photo resistor for light sensitivity). Most of the time there is also a power switch (often a toggle switch) and a volume knob. |
Atari Punk console is an astable square wave [[oscillator]] driving a monostable oscillator that creates a single (square) pulse. There are two controls, one for the frequency of the oscillator and one to control the volume. The controls are usually [[potentiometers]] but the circuit can also be controlled by light, temperature, pressure etc. by replacing a potentiometer with a suitable sensor (e.g., photo resistor for light sensitivity). Most of the time there is also a power switch (often a toggle switch) and a volume knob. |
||
== Problems == |
|||
| ⚫ | The circuit is a simple DIY noisemaker circuit that is relatively inexpensive and easy to build, easily adaptable and is configurable in many ways. It has been built into a wide variety of enclosures. Its flexibility has led to wide popularity. It is often suggested as a good circuit to build for beginners. |
||
With a pot turned down to minimum, because internally the 555 shorts pin 7 to ground during parts of the oscillation, there will be a short circuit across the battery. There's needs to be something to limit the current through the pots and pin 7. Add a series resistor to each of the pots, e.g. 330 Ohms at 9 Volts will limit the power to just under a 1/4 Watt, (the rating of most pots). This will affect the frequency of the oscillator so you may have to experiment with higher value resistors.<ref>[https://www.diystompboxes.com/smfforum/index.php?topic=65396.0 Atari Punk Console - Sparking Pots?], DIYstompboxes.com</ref><ref>[https://www.diystompboxes.com/smfforum/index.php?topic=71808.0 Help! APC B1M pot catching fire!!], DIYstompboxes.com</ref><ref>[https://electronics.stackexchange.com/questions/102592/problems-with-atari-punk-console-circuit Problems with Atari Punk Console circuit], Electrical Engineering Stack Exchange</ref> |
|||
| ⚫ | |||
== References == |
== References == |
||
| ⚫ | |||
{{Reflist}} |
{{Reflist}} |
||
| Line 14: | Line 19: | ||
* [http://compiler.kaustic.net/machines/apc.html Kaustic Machines] implementation, with speaker changed to line output |
* [http://compiler.kaustic.net/machines/apc.html Kaustic Machines] implementation, with speaker changed to line output |
||
* [http://www.forrestmims.org/ Forrest M. Mims III] web page |
* [http://www.forrestmims.org/ Forrest M. Mims III] web page |
||
* [http://recompas.com/portfolio/the-voice-of-saturn-synthesizer-mk-i/ Voice of Saturn Synthesizer MK I], based on the APC and uses a vactrol for |
* [http://recompas.com/portfolio/the-voice-of-saturn-synthesizer-mk-i/ Voice of Saturn Synthesizer MK I], based on the APC and uses a vactrol for voltage control. |
||
* [https://www.instructables.com/id/Voltage-Controlable-Atari-Punk-Console/ Atari Punk Console], Instructables, with voltage control |
|||
* [https://lushprojects.com/apc/lushprojects-atari-punk-console.pdf Atari Punk Console kit build instructions], lushprojects.com. Uses stripboard and includes helpful basic electronic background info. |
|||
* [http://fritzing.org/projects/atari-punk-console-aka-the-stepped-tone-generator Atari Punk Console a.k.a The Stepped Tone], [[Fritzing]] |
|||
* [http://fritzing.org/projects/atari-punk-console-with-cv-inpus Atari Punk Console with CV inpus], Fritzing |
|||
* [https://web.archive.org/web/20201016203932/https://sites.google.com/a/berklee.edu/jmdblog-491/customization/fmsynthesizerwithtwo555chips FM synthesizer with two 555 Chips] by Juan M Delgado - archived |
|||
=== Kits and PCBs === |
|||
* [https://web.archive.org/web/20190717185235/https://www.emizinstruments.com/sdiy/atari-punk-console-p-57.html?language=en eMiZ Instruments] |
|||
Latest revision as of 19:02, 19 July 2022
_and_bridge_added.png)
The Atari Punk Console (commonly shortened to APC) is a popular circuit that utilizes two 555 timer ICs or a single 556 dual timer IC. The circuit is a simple DIY noisemaker circuit that is relatively inexpensive and easy to build, easily adaptable and is configurable in many ways. It has been built into a wide variety of enclosures. Its flexibility has led to wide popularity. It is often suggested as a good circuit to build for beginners.
History
The original circuit, called a "Sound Synthesizer", was published in a Radio Shack booklet: "Engineer's Notebook: Integrated Circuit Applications" in 1980[1] and later called "Stepped Tone Generator" in "Engineer's Mini-Notebook – 555 Circuits" by its designer, Forrest Mims.[2] It was named "Atari Punk Console" (APC) by Kaustic Machines because its "low-fi" sounds resemble classic Atari console games from the 1980s, with a square wave output similar to the Atari 2600. Kaustic Machines added a -4db line level output to the circuit which was originally designed to drive a small 8-ohm speaker.
How it works
Atari Punk console is an astable square wave oscillator driving a monostable oscillator that creates a single (square) pulse. There are two controls, one for the frequency of the oscillator and one to control the volume. The controls are usually potentiometers but the circuit can also be controlled by light, temperature, pressure etc. by replacing a potentiometer with a suitable sensor (e.g., photo resistor for light sensitivity). Most of the time there is also a power switch (often a toggle switch) and a volume knob.
Problems
With a pot turned down to minimum, because internally the 555 shorts pin 7 to ground during parts of the oscillation, there will be a short circuit across the battery. There's needs to be something to limit the current through the pots and pin 7. Add a series resistor to each of the pots, e.g. 330 Ohms at 9 Volts will limit the power to just under a 1/4 Watt, (the rating of most pots). This will affect the frequency of the oscillator so you may have to experiment with higher value resistors.[3][4][5]
References
This page uses Creative Commons Licensed content from Wikipedia:Atari_Punk_Console (view authors).
- ^ Engineer's Notebook: Integrated Circuit Applications, Jameco
- ^ Mini-Notebook, Radio Shack - archived
- ^ Atari Punk Console - Sparking Pots?, DIYstompboxes.com
- ^ Help! APC B1M pot catching fire!!, DIYstompboxes.com
- ^ Problems with Atari Punk Console circuit, Electrical Engineering Stack Exchange
External links
- Making Music with an Atari Punk Console by Forrest M. Mims III, Jameco
- Kaustic Machines implementation, with speaker changed to line output
- Forrest M. Mims III web page
- Voice of Saturn Synthesizer MK I, based on the APC and uses a vactrol for voltage control.
- Atari Punk Console, Instructables, with voltage control
- Atari Punk Console kit build instructions, lushprojects.com. Uses stripboard and includes helpful basic electronic background info.
- Atari Punk Console a.k.a The Stepped Tone, Fritzing
- Atari Punk Console with CV inpus, Fritzing
- FM synthesizer with two 555 Chips by Juan M Delgado - archived