CGS Metasonix TS-21 Hellfire Modulator
Hellfire Modulator
The Metasonix TS-21 Hellfire Modulator is another of Eric Barbour's tube designs. It is essentially a custom built TS-21 Hellfire Modulator. These are available pre-built, in a 2U rack-mounting cabinet from Metasonix. Fairly obviously, this one has had one of my panel designs inflicted on it.
It could be considered as two effects in one, a pulse width modulator and a beam modulator. It is possible to get a wide variety of effects from this, from simple tremolo, to fairly serious wave mangling. The PWM section can be used to get some pretty aggressive sounds, which can then be modified further by the beam modulator (wave folding, tremolo etc.). A rather versatile module.
 |
 |
| Here's one for all the people who keep asking if my modules "really look like that". From the photo, it should be obvious that they do. | |
See also
References
- Hellfire Modulator (archived) by Ken Stone, 2001, with permission of the author
External links
- CGS Synth discussion group, for discussion of locating parts, modifications and corrections etc.
- Audio Synthesis via Vacuum Tubes by Eric Barbour, includes an article and circuit diagram for a beam modulator similar to the one in this module. If you want the whole deal, you'll have to buy the TS-21.