CGS dev-mod joiner: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
(Created page with "thumb|center|200px| '''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together. == Methods of joining dev blocks,...") |
|||
| Line 2: | Line 2: | ||
'''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together. |
'''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together. |
||
== |
== Joining dev blocks == |
||
[[File:cgs_photo_cgs72_01.jpg|thumb|center|236px|Standard 0.1 header jumpers as used in computers etc.. When the boards are pushed up against each other, the spacing between their rows of pins is 0.1"]] |
[[File:cgs_photo_cgs72_01.jpg|thumb|center|236px|Standard 0.1 header jumpers as used in computers etc.. When the boards are pushed up against each other, the spacing between their rows of pins is 0.1"]] |
||
[[File:cgs_photo_cgs72_02.jpg|thumb|center|400px|CGS72 fitted with a 28 pin dual row 0.1" socket, used from above. Note that the mounting holes of the CGS72 line up with the mounting holes of the dev blocks it is joining.]] |
[[File:cgs_photo_cgs72_02.jpg|thumb|center|400px|CGS72 fitted with a 28 pin dual row 0.1" socket, used from above. Note that the mounting holes of the CGS72 line up with the mounting holes of the dev blocks it is joining.]] |
||
| ⚫ | |||
[[File:cgs_photo_cgs72_04.jpg|thumb|center|600px|The pins fitted to the dev block are modified wire-wrap headers and have as much length below the PCB as they do above.]] |
[[File:cgs_photo_cgs72_04.jpg|thumb|center|600px|The pins fitted to the dev block are modified wire-wrap headers and have as much length below the PCB as they do above.]] |
||
| ⚫ | |||
== Parts list == |
== Parts list == |
||
Revision as of 07:10, 25 May 2019
CGS72 the CGS dev-mod joiner offers one way of joining dev PCBs together.
Joining dev blocks
Parts list
This is a guide only. Parts needed will vary with individual constructor's needs.
| Part | Quantity |
| Misc | |
|---|---|
| 28 pin dual row 0.1 header | 1 |
| CGS72 PCB | 1 |
Notes
- PCB 0.6" x 2" with four 3mm mounting holes 0.15" in from the edges.
See also
References
echo * Dev-mod joiner for music synthesizers. (archived) by Ken Stone, 2007, with permission of the author
External links
- CGS Synth discussion group, for discussion of locating parts, modifications and corrections etc.