CGS dev-mod joiner: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
VisualWikitext
m (Text replacement - " (archived) by Ken Stone, 2007, with permission of the author" to " by Ken Stone, 2007, with permission of the author - archived")
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:cgs_photo_cgs72_join.jpg|thumb|center|200px|]]
[[File:cgs_photo_cgs72_join.jpg|thumb|center|200px|]]
'''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining dev PCBs together.
'''CGS72''' the '''CGS dev-mod joiner''' offers one way of joining [[CGS dev-mod generic prototyping block|CGS dev-mod]] PCBs together.

== Construction ==
[[File:cgs_pcb_cgs72_join.gif|thumb|center|200px|The PCB.]]


== Joining dev blocks ==
== Joining dev blocks ==
Line 23: Line 26:
=== Notes ===
=== Notes ===
* PCB 0.6" x 2" with four 3mm mounting holes 0.15" in from the edges.
* PCB 0.6" x 2" with four 3mm mounting holes 0.15" in from the edges.

== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.


== See also ==
== See also ==
Line 29: Line 35:


== References ==
== References ==
echo * ''[https://web.archive.org/web/20180209234737fw_/http://www.CGS.synth.net:80/modules/CGS72_join.html Dev-mod joiner for music synthesizers.]'' (archived) by Ken Stone, 2007, with permission of the author
echo * ''[https://web.archive.org/web/20180209234737f/http://www.CGS.synth.net:80/modules/CGS72_join.html Dev-mod joiner for music synthesizers.]'' by Ken Stone, 2007, with permission of the author - archived


== External links ==
== External links ==
* [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.



[[Category:CGS modular]]
[[Category:CGS general and accessories]]

Latest revision as of 18:43, 19 July 2022

CGS72 the CGS dev-mod joiner offers one way of joining CGS dev-mod PCBs together.

Construction

The PCB.

Joining dev blocks

Standard 0.1 header jumpers as used in computers etc.. When the boards are pushed up against each other, the spacing between their rows of pins is 0.1"
CGS72 fitted with a 28 pin dual row 0.1" socket, used from above. Note that the mounting holes of the CGS72 line up with the mounting holes of the dev blocks it is joining.
CGS72 fitted with a 28 pin dual row 0.1" socket, used from below.
The pins fitted to the dev block are modified wire-wrap headers and have as much length below the PCB as they do above.

Parts list

This is a guide only. Parts needed will vary with individual constructor's needs.

Part Quantity
Misc
28 pin dual row 0.1 header 1
CGS72 PCB 1

Notes

  • PCB 0.6" x 2" with four 3mm mounting holes 0.15" in from the edges.

CC-BY-NC

Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.

See also

References

echo * Dev-mod joiner for music synthesizers. by Ken Stone, 2007, with permission of the author - archived

External links

Retrieved from "https://sdiy.info/wiki/CGS_dev-mod_joiner?oldid=20502"