Eurorack parts: Difference between revisions
mNo edit summary |
Dub Halley (talk | contribs) (Add Synthpanel design) Tags: Mobile edit Mobile web edit Visual edit |
||
(95 intermediate revisions by 2 users not shown) | |||
Line 1:
This information is for doing DIY,
== Front panels ==
=== Specifications ===
The Eurorack format was developed in parallel by [[Analogue Systems]] and [[Doepfer Musikelektronik GmbH|Doepfer]], with different approaches to module power connectors and front panel mounting holes. These days the Doepfer standard predominates.<ref>[
==== Panels ====
Doepfer specifies the Eurorack front panel material as 2 mm anodized aluminium.<ref name="a100m">Doepfer [http://www.doepfer.de/a100_man/a100m_e.htm A-100 Construction Details]</ref> In practice panels from other manufacturers may slightly differ, e.g. Synthwerks use the closest gauge that [http://metalphoto.com/ Metalphoto] offer which is 0.0625" (1.59 mm). Also check data sheets for front panel parts, e.g. the maximum recommended thickness for [[3.5
Front panel dimensions in the the Eurorack format are specified in U and HP not in inches or millimeters. One U (unit) or in German HE (höhen einheit) is 1.75 inches equivalent to 44.45 mm. The panels height is [[3U]] (3x1.75"=5.25" or 133.35 mm) less any allowance for mounting rail flange. Width is measured in HP (horizontal pitch) or in German TE (teilungs einheiten); 1 HP is 5.08 mm, 1/5", 0.2" or 200mil. The actual width of a front panel is a few tenth of a mm less than whatever multiple of 5.08 mm it is, to give some tolerance for final assembly. A [[19-inch rack]] has a usable width of 84 HP.<ref name="hinton" /><ref name="a100m" /><ref name="confused">[
The vertical space available between mounting rails is:
Line 12:
* Gie-Tec, Proma (now defunct) and TipTop Z-Rails, 112.5mm (4.429 inches)
* Vector, 115.1mm (4.531 inches)
These don't include a tolerances for the screw hole in the panel nor for the nut in the rail moving up and down. It's better to give a little more clearance than suggested by these figures.<ref name="six">[
==== Panel mounting holes ====
If the Doepfer specification is followed, or rails with sliding nuts are used, elongated holes are not required. These are useful for non-standard panel widths like the Piston Honda's and to compensate for for manufacturing tolerances of the panel width or hole position. They help to fit the modules flush against one another.<ref name="oval">[
Oval holes were originally for mixed Analogue Systems and Doepfer systems. The AS holes are 0.2" from the panel edge and the Doepfer holes are 0.3" from the edge. The oval holes were originally used to allow these modules to be placed in the same threaded rows without having the 1/2 HP gap that would otherwise result. These days the oval holes are mostly just centered on the Doepfer spacing.<ref name="oval"/>
Line 21:
For front panels up to 10 HP two mounting holes are sufficient, wider than this and four mounting holes are usual. To attach the modules to the mounting rails M3x6 DIN 7985 cross recessed pan head machine screws are used. The mounting hole diameter is 3.2mm (0.13"), centered 3mm from top and bottom edges and 7.45mm from the left edge. The horizontal distance between the mounting holes has to be a multiple of 5.08mm.<ref name="hinton" /><ref name="a100m" /><ref name="confused" />
==== Mounting rails ====
[[File:Eurorack panels on Gie-Tec rails.jpg|thumb|200px|Eurorack panels mounted on Gie-Tec rails, with sliding nuts. Note the lip along one edge of the rail.]][[File:Eurorack panels on Vector rails.jpg|thumb|200px|Eurorack panels mounted on Vector rails, with sliding nuts.]]Unless attaching the panels directly into the wood of an enclosure; Doepfer aluminium mounting rails from Schroff or Gie-Tech usually have a 1.2mm lip and are fitted with a number of square nuts or a threaded strip with M3 tapped holes, spaced with 5.08mm between centres.<ref>TipTop [http://www.tiptopaudio.com/manuals/z-rails.pdf Z-Rails dimensions]</ref> Be careful not to get Schroff rails that take M2.5 screws.<ref>[
Brands using M2.5 square nuts or tapped strips and M2.5x6mm machine screws: [[4ms]], [[Elby Designs]] (SRS), [[Enclave]], [[
Brands using
Brands using Gie-Tec rails with M3 nuts or tapped strip and M3x6 machine screws: [[Tiptop]], [[Gorillabox]], [[Doepfer]]<ref name="enc" />
Eurorack rack fittings can be bought from:
Line 31 ⟶ 33:
* Elby Designs:[http://www.elby-designs.com/contents/en-us/d39.html Construct-A-Rack], Australia
Tiptop Z-Rails can be purchased from:
* [https://web.archive.org/web/20150524212410/http://www.tiptopaudio.com/zrails.php Tiptop Audio]
Vector mounting rails can be purchased from:
* [https://web.archive.org/web/20150428053732/http://erthenvar.com/store/eurodiy/casehardware Erthenvar]
* Component suppliers such as [http://www.digikey.ca/product-detail/en/TS169/V2002-ND/280464?itemSeq=145033994&uq=635291864084806300 Digi-Key], [http://uk.farnell.com/vector-electronics/ts169/mounting-rail/dp/1723261 Farnell] or [http://uk.mouser.com/ProductDetail/Vector/TS169/?qs=2uJXkMYZVXPYqAAhJk9hwA== Mouser]
<!--
Line 41 ⟶ 43:
=== Blank panels ===
For small panels it's cheapest to buy Doepfer pre-made blank panels. For wider panels it might be worth getting them done by Frontpanel Express, without labeling and with whatever holes are required. Getting aluminum cut by general online metal suppliers is going to deliver metal that is approximate in size and the edges will need filing down to get it to the correct size.<ref name="guage2"<ref>[https://www.modwiggler.com/forum/viewtopic.php?t=50409&start=all&postdays=0&postorder=asc Sheet Metal (aluminium) UK], Mod Wiggler forum, January 2012</ref>
* [http://www.reichelt.de/Baugruppentraeger/BGT-TFP-312/3/index.html?;ACTION=3;LA=446;ARTICLE=34002;GROUPID=3363;artnr=BGT+TFP+312;SID=26PTQzxKwQARoAAHOZA-w413b4ed837993f58e14dcd8d28089d58 Reichelt Elektronik], Germany
* [https://web.archive.org/web/20151207005051/http://syinsi.com/product/blank-panels/ syinsi.com], USA, blank/blind panels for Eurorack
Suppliers:
* [https://web.archive.org/web/20150508002217/http://www.onlinemetals.com/merchant.cfm?id=239&step=2&top_cat=60 OnlineMetals.com], USA – large blank panels
* [http://www.allmetalparts.co.uk/ All Metal Parts], UK – large blank panels
* [http://metalsupermarkets.co.uk/metals/consumer-guide/aluminum/ Metal Supermarkets], UK and USA
* [http://uk.farnell.com/jsp/search/browse.jsp?N=2031+203472&Ntk=gensearch&Ntt=schroff&Ntx=mode+matchallpartial Farnell]
* [https://web.archive.org/web/20150309000450/http://www.aluminiumwarehouse.co.uk/sheet_calc.php Aluminium Warehouse], UK
* [http://metaloffcuts.co.uk/ MetalOffCuts], UK
* [https://web.archive.org/web/20151207005051/http://syinsi.com/product/blank-panels/ Eurorack Blank Panels], Canada
* [https://www.thomann.de/gb/doepfer_other_accessories_1.html?feature-53638=true&filter=true&oa=pra&price-first=0 Thomann], Germany
=== Custom panels ===
Line 58 ⟶ 64:
* [http://www.frontpanelexpress.com/ Front Panel Express], USA
* [http://www.schaeffer-ag.de/ Schaeffer], EU
* [https://www.ponoko.com/ Ponoko]
For FPE and Schaeffer, you need to supply the blank Euro panel.
You can also draw your front panels very easily with this extension of the free software Inkscape [http://inkscape.org/]
[https://synthpanels.design/ synthpanelsdesign]
=== Project panels ===
Panels for specific projects can be purchased from:
* [http://grayscale.info/panels/ Grayscale], USA
* [https://web.archive.org/web/20151211113518/http://modularaddict.com/parts/panels.html Modular Addict]
* [http://synthcube.com/cart/index.php?route=product/category&path=74_76&limit=300 synthCube], USA
* [http://www.thonk.co.uk/product-category/panel/ Thonk], UK
* [http://www.synthpanels.com/ Synth Panels], USA
=== Front panel labelling options ===
''See [[Panel (homebrew)]]''
== Front panels parts ==
''See [[Eurorack panel components]]''
== PCB dimensions and mounting ==
These days Eurorack modules tend to mount the PCB parralel to the front panel, held in place by the pots, jacks and switches.<ref name="six"
The vertical distance between the mounting holes on Eurorack rails is 122.5mm apart (4.823"). Based on the manufacturer's drawings for the most common rails used in Euro cases, the clear space between pairs of rails is:
Line 146 ⟶ 95:
Those don't include the tolerances (slop) of the nut in the rail moving up and down and the screw hole in the front panel. These can cause the rails to be closer or further apart when any given module is tightened in. It's better to try to give a little more clearance and not count on these exact figures.<ref name="six" />
To fit between the mounting rails the maximum vertical PCB size can be from 108mm (4.25") to 110mm. The width of the PCB needs to be a touch less than that of the front panel, whilst allowing for clearance and taking tolerances into consideration.<ref name="hinton" /><ref name="six" /><ref name="erthenvar">[https://web.archive.org/web/20151207105044/http://erthenvar.com/store/accessories/3.5mm-vertical-mount-jacks 3.5mm Vertical Mount Jacks], Erthenvar</ref>
=== Stacked PCBs ===
Stacked PCBs can be connected with standard 0.1" single and double row male/female pin headers. These combine to a height of 7/16 inch or 11mm and boards can be mounted to each other with spacers of this length.<ref name="hw">[
Don't use tools you value highly, the headers are made of brittle glass filled epoxy which will damage the edge of any blades used to cut it. To get the single row male headers to length, grip the last pin of the length you want firmly in pliers and snap the rest off. The female headers don't snap easily so first pull the pins out of the body at the point where you want it to snap, then file the ends smooth. Alternately combine smaller lengths to make up the length required. To get them to butt against each other at 0.1" if there is extra plastic on the ends file it down.<ref name="hw" />
Suitable parts can be purchased for example:<ref
* [http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/929974-01-36-RK/?qs=Z7nQflo5OWeXTtG8NqxhFQ%3D%3D 517-929974-01-36-RK], Mouser female 2.54mm pin header, 36 way, tin plated copper
* [http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/929834-01-36/?qs=QV10cN0MjFtGMxJSq6rXkQ%3D%3D 517-834-01-36], Mouser male 2.54mm pin header, 36 way, tin plated copper
Line 162 ⟶ 111:
==== Caution ====
'''Never trust the ribbon cable or the coloured wire.''' Before connection examine the module, the power distribution bus and the ribbon cable to ensure that matching connections will be made at either end. Even with [[shrouded header]]s don't plug the cable in because it fits, always first ensure the correct connections will be made.<ref name="def">[
==== Doepfer ====
Doepfer modules, (the de facto standard)<ref name="hinton" /> use two row of 8 [[pin header|male pin headers]] for connecting power and [[normalising]] [[CV/
==== Cwejman ====
Line 191 ⟶ 140:
<!-- Add for shrouded -->
* IDC female connector with strain relief 10 pin (Rapid [http://www.rapidonline.com/cables-connectors/harting-09-18-510-6813-idc-female-connector-strain-relief-10-pin-2-54mm-51-9587 51-9587], [http://www.rapidonline.com/cables-connectors/2-54mm-pitch-10-way-idc-cable-mounting-socket-19-1017 19-1017], Mouser [http://fi.mouser.com/Search/ProductDetail.aspx?R=61201023021virtualkey%2051110000virtualkey710-61201023021 710-61201023021])
* IDC female connector with strain relief 16 pin (Rapid [http://www.rapidonline.com/cables-connectors/harting-09-18-516-6813-idc-female-connector-strain-relief-16-pin-2-54mm-51-9596 51-9596], [https://web.archive.org/web/20150606145556/http://www.rapidonline.com/
An IDC crimping tool for the assembly of IDC connectors onto flat ribbon cable:
* Duratool IDC crimping tool (Rapid [http://www.rapidonline.com/Tools-Equipment/IDC-Connector-Crimping-Tool-86-0860?sourceRefKey=8xLhGpE2A&filterSearchScope=1 86-0860], CPC [http://cpc.farnell.com/jsp/search/productdetail.jsp?sku=TL08619#similarProducts TL08619])
Line 219 ⟶ 168:
* [http://synovatron.blogspot.co.uk/2011/01/analogue-systems-to-doepfer-adaptor.html Analogue Systems to Doepfer Adaptor]
* [http://synovatron.blogspot.co.uk/2011/01/analogue-systems-to-doepfer-reverse.html Analogue Systems to Doepfer Reverse Adaptor]
== Power supplies ==
[[File:Lowpass Filter LC.svg|thumb|right|150px|LC filter to further reduce the amount of output ripple and transients on a switching PS.]] A good clean power supply unit (PSU) is the most important part of a modular system. A proper [[Power supply (linear)|linear power supply]] and good distribution makes a big difference to the stability and sound quality of the system.<ref>[https://www.modwiggler.com/forum/viewtopic.php?p=1470018 Best Eurorack Power Supply (PSU) for your buck?], Mod Wiggler forum, 23 Feb 2014</ref>
[[Power supply (switching)|Switch-mode power supplies]] (SMPS) are smaller, lighter, and much more efficient (give off less heat) than linear power supplies but produce noise, (above the audio range) on their output.<ref>{{Cite web |url=http://cp.literature.agilent.com/litweb/pdf/5990-3242EN.pdf |title=Understanding the Importance of Low-Noise Linear Power Supplies |accessdate=2016-03-04 |archiveurl=https://web.archive.org/web/20121219163349/http://cp.literature.agilent.com/litweb/pdf/5990-3242EN.pdf |archivedate=2012-12-19 |url-status=dead |df= }}</ref> About 1% of the output voltage of a switching power is a sawtooth ripple at the switcher frequency. Due to the fast output switching and the parasitic inductance of the output filter capacitor there may also be short voltage spikes at the peaks of the sawtooth. Use low inductance capacitors with short leads to minimize these voltage spikes. Adding a small LC filter to the output can further reduce the ripple and transients to a tenth of their level.<ref>[http://www.ti.com/lit/ds/symlink/lm2574.pdf Output voltage ripple and transients], LM2574 data sheet</ref>
=== Safety ===
Mains voltages can kill and [[capacitor]]s in disconnected power supplies can still deliver quite a jolt. Unless you're qualified to work with mains electricity ready made external transformers are safer.
== See also ==
* [[Eurorack panel components]]
* [[Eurocard]]
* [[Comparison of Eurorack DIY PSUs]]
== References ==
{{From Mod Wiggler Wiki|vertical Mount Components}}
{{split_to|[[Eurorack panel components]]|22 April 2016}}
{{reflist}}
== External links ==
* GitHub, [https://github.com/rahji/eurorack-ears rahji/eurorack-ears], CAD drawings for Eurorack rails, ears/brackets
* The Eurorack Database – [https://web.archive.org/web/20150528001000/http://www.eurorackdb.com/node/h_diy_sources Eurorack DIY Resources]
* [http://mutable-instruments.net/forum/discussion/3329/diy-eurorack-modules-/p1 DIY eurorack modules...], Mutable Instruments
* [https://www.youtube.com/watch?v=BvsTenEcY5k Analogue Systems power supply & Eurorack modular synth case]
* [https://web.archive.org/web/20150507025508/http://www.eurorackdb.com/node/h_power_supply_list/ Power Supplies], The Eurorack Database
* [http://www.firstpr.com.au/rwi/parts/3.5 mm-sockets/ 3.5 mm mono sockets for vertical PCB mounting] by Robin Whittle, Real World Interfaces, 2014
* [http://www.mcmaster.com/#standard-aluminum-sheets/=xe70s0 About Aluminum], McMaster-Carr
* [https://docs.google.com/spreadsheets/d/17qu-PkyJnjZf9YzhNYy7X7-d-lmZqhahyUW0YM1b2N0/edit#gid=0 The big eurorack PSU list]
=== Schematics, PCB overlays, BOMs and assembly instructions ===
* [http://www.modular.fonik.de/ Fonitronik Synth DIY]
* [https://web.archive.org/web/20150913114847/http://www.aleph.co.jp/~takeda/radio/homemadesynthE.html Home Made Synth]
* [https://web.archive.org/web/20060111050127/http://www.musicfromouterspace.com/ Music From Outer Space]
* [http://yusynth.net/index_en.php YuSynth]
* [https://web.archive.org/web/20170430151727/http://cgs.synth.net/ CGS]
* [https://github.com/search?utf8=%E2%9C%93&q=Eurorack&type=Repositories&ref=searchresults GitHub]
=== Mod Wiggler forum ===
* [https://www.modwiggler.com/forum/viewtopic.php?t=57933&start=all&postdays=0&postorder=asc Panel mounted controls vs PCB mounted controls, and more!], April 2012
* [https://www.modwiggler.com/forum/viewtopic.php?t=40206&start=all&postdays=0&postorder=asc Potentiometers / Mouser], August 2011
* [https://www.modwiggler.com/forum/viewtopic.php?t=10682&postdays=0&postorder=asc&start=15&sid=1f9f1c0e2b280ae0ed45379d38515347 DIY euro case...rails?], December 2009
* [https://www.modwiggler.com/forum/viewtopic.php?t=108045&start=all&postdays=0&postorder=asc The Pitfalls of Choosing Quality Brands of Components?], March 2014
=== Eurorack parts suppliers ===
* [https://web.archive.org/web/20200608223714/https://modularsynthlab.com/store/ ModularSynthLab], Netherlands
[[Category:Eurorack]]
[[Category:Components]]
|
Latest revision as of 22:07, 16 March 2023
This information is for doing DIY, re-paneling, and/or repairs on Euro systems. It's not comprehensive, everyone has preferences, but lists the common, major or most-wanted parts in the Eurorack format, and/or what sort of things will work.
Front panels
Specifications
The Eurorack format was developed in parallel by Analogue Systems and Doepfer, with different approaches to module power connectors and front panel mounting holes. These days the Doepfer standard predominates.[1][2] The format is based on DIN 41494 Eurocard standard.[3]
Panels
Doepfer specifies the Eurorack front panel material as 2 mm anodized aluminium.[4] In practice panels from other manufacturers may slightly differ, e.g. Synthwerks use the closest gauge that Metalphoto offer which is 0.0625" (1.59 mm). Also check data sheets for front panel parts, e.g. the maximum recommended thickness for 3.5 mm Cliff 1384 jacks is 2.5 mm.[5] Front panel dimensions in the the Eurorack format are specified in U and HP not in inches or millimeters. One U (unit) or in German HE (höhen einheit) is 1.75 inches equivalent to 44.45 mm. The panels height is 3U (3x1.75"=5.25" or 133.35 mm) less any allowance for mounting rail flange. Width is measured in HP (horizontal pitch) or in German TE (teilungs einheiten); 1 HP is 5.08 mm, 1/5", 0.2" or 200mil. The actual width of a front panel is a few tenth of a mm less than whatever multiple of 5.08 mm it is, to give some tolerance for final assembly. A 19-inch rack has a usable width of 84 HP.[3][4][6][7][8]
The vertical space available between mounting rails is:
- Schroff, 112.2 mm (4.415 inches)
- Gie-Tec, Proma (now defunct) and TipTop Z-Rails, 112.5mm (4.429 inches)
- Vector, 115.1mm (4.531 inches)
These don't include a tolerances for the screw hole in the panel nor for the nut in the rail moving up and down. It's better to give a little more clearance than suggested by these figures.[9]
Panel mounting holes
If the Doepfer specification is followed, or rails with sliding nuts are used, elongated holes are not required. These are useful for non-standard panel widths like the Piston Honda's and to compensate for for manufacturing tolerances of the panel width or hole position. They help to fit the modules flush against one another.[10] In a double width case, there will be a gap where the two threaded inserts meet, unless e.g. single 168 HP tiptop Z rails are used.[11]
Oval holes were originally for mixed Analogue Systems and Doepfer systems. The AS holes are 0.2" from the panel edge and the Doepfer holes are 0.3" from the edge. The oval holes were originally used to allow these modules to be placed in the same threaded rows without having the 1/2 HP gap that would otherwise result. These days the oval holes are mostly just centered on the Doepfer spacing.[10]
For front panels up to 10 HP two mounting holes are sufficient, wider than this and four mounting holes are usual. To attach the modules to the mounting rails M3x6 DIN 7985 cross recessed pan head machine screws are used. The mounting hole diameter is 3.2mm (0.13"), centered 3mm from top and bottom edges and 7.45mm from the left edge. The horizontal distance between the mounting holes has to be a multiple of 5.08mm.[3][4][6]
Mounting rails
Unless attaching the panels directly into the wood of an enclosure; Doepfer aluminium mounting rails from Schroff or Gie-Tech usually have a 1.2mm lip and are fitted with a number of square nuts or a threaded strip with M3 tapped holes, spaced with 5.08mm between centres.[12] Be careful not to get Schroff rails that take M2.5 screws.[13] Vector T-Strut rails do not have a lip and take a M2.5 threaded strip or 4-40 square nuts.[14] Nuts are more fiddly than threaded strip, but the modules can then be butted flush against each other, for example when Analogue Sytem and Doepfer-style modules share the same rack rails.[15]
Brands using M2.5 square nuts or tapped strips and M2.5x6mm machine screws: 4ms, Elby Designs (SRS), Enclave, Rittal[16][17]
Brands using Vector rails with M2.5 square nuts or tapped strips and M2.5x6mm machine screws: Erthenvar, Goike[17]
Brands using Gie-Tec rails with M3 nuts or tapped strip and M3x6 machine screws: Tiptop, Gorillabox, Doepfer[16]
Eurorack rack fittings can be bought from:
- Clicks & Clocks:DIY Eurorack Materials and Parts: All You Need?, Germany
- Elby Designs:Construct-A-Rack, Australia
Tiptop Z-Rails can be purchased from:
Vector mounting rails can be purchased from:
Blank panels
6061 aluminum alloy, T3 or T6 temper, is easy to come by, can be easily worked. Thickness usually ranges between 1.5 mm (0.62") and 2.5 mm (0.12") but see what is standard for the format, e.g. a thickness of 2 mm (0.08") for 3U. Softer 1100-H aluminium alloy from MetalPhoto and 1.59 mm (0.625") thick, is used for many Euro panels but is usually punched rather than drilled.[5][18]
For small panels it's cheapest to buy Doepfer pre-made blank panels. For wider panels it might be worth getting them done by Frontpanel Express, without labeling and with whatever holes are required. Getting aluminum cut by general online metal suppliers is going to deliver metal that is approximate in size and the edges will need filing down to get it to the correct size.[19]
- Reichelt Elektronik, Germany
- syinsi.com, USA, blank/blind panels for Eurorack
Suppliers:
- OnlineMetals.com, USA – large blank panels
- All Metal Parts, UK – large blank panels
- Metal Supermarkets, UK and USA
- Farnell
- Aluminium Warehouse, UK
- MetalOffCuts, UK
- Eurorack Blank Panels, Canada
- Thomann, Germany
Custom panels
Custom panels can be manufactured by:
- Re:Synthesis, UK
- Front Panel Express, USA
- Schaeffer, EU
- Ponoko
For FPE and Schaeffer, you need to supply the blank Euro panel.
You can also draw your front panels very easily with this extension of the free software Inkscape [1]
Project panels
Panels for specific projects can be purchased from:
- Grayscale, USA
- Modular Addict
- synthCube, USA
- Thonk, UK
- Synth Panels, USA
Front panel labelling options
See Panel (homebrew)
Front panels parts
PCB dimensions and mounting
These days Eurorack modules tend to mount the PCB parralel to the front panel, held in place by the pots, jacks and switches.[9] Modules with wired front panel components cost more to manufacture than PCB mounted, however these electro-mechanical components have limited lifetimes and while PCB mounted parts can be repaired it's not as easily as wired components. Also PCB mounted components mean the board is designed around specific parts. If any of these parts goes out of production the modules have to be redesigned, with the additional cost of updating the PCBs.[20]
The vertical distance between the mounting holes on Eurorack rails is 122.5mm apart (4.823"). Based on the manufacturer's drawings for the most common rails used in Euro cases, the clear space between pairs of rails is:
- 112.2mm, 4.415" = Schroff
- 112.5mm, 4.429" = Gie-Tec and TipTop Z-Rails
- 115.1mm, 4.531" = Vector
Those don't include the tolerances (slop) of the nut in the rail moving up and down and the screw hole in the front panel. These can cause the rails to be closer or further apart when any given module is tightened in. It's better to try to give a little more clearance and not count on these exact figures.[9]
To fit between the mounting rails the maximum vertical PCB size can be from 108mm (4.25") to 110mm. The width of the PCB needs to be a touch less than that of the front panel, whilst allowing for clearance and taking tolerances into consideration.[3][9][21]
Stacked PCBs
Stacked PCBs can be connected with standard 0.1" single and double row male/female pin headers. These combine to a height of 7/16 inch or 11mm and boards can be mounted to each other with spacers of this length.[22]
Don't use tools you value highly, the headers are made of brittle glass filled epoxy which will damage the edge of any blades used to cut it. To get the single row male headers to length, grip the last pin of the length you want firmly in pliers and snap the rest off. The female headers don't snap easily so first pull the pins out of the body at the point where you want it to snap, then file the ends smooth. Alternately combine smaller lengths to make up the length required. To get them to butt against each other at 0.1" if there is extra plastic on the ends file it down.[22]
Suitable parts can be purchased for example:[22]
- 517-929974-01-36-RK, Mouser female 2.54mm pin header, 36 way, tin plated copper
- 517-834-01-36, Mouser male 2.54mm pin header, 36 way, tin plated copper
- 855-R30-1001102, Mouser M3x11mm hex spacer. Fit to the PCB with M3x5mm machine screws.
Internal connectors
Power connectors
Do not mix terminals and headers made of different metals. With dissimilar metals the contact resistance will go up, causing all sorts of problems.[23]
Caution
Never trust the ribbon cable or the coloured wire. Before connection examine the module, the power distribution bus and the ribbon cable to ensure that matching connections will be made at either end. Even with shrouded headers don't plug the cable in because it fits, always first ensure the correct connections will be made.[24]
Doepfer
Doepfer modules, (the de facto standard)[3] use two row of 8 male pin headers for connecting power and normalising CV/gate. The pins are 0.1" (2.54mm) apart and at a 0.1" pitch. The interconnection is done via ribbon cable with 1.27mm (0.05") pitch, and using female sockets, 16-pin to the supply bus and either 16 or 10-pin to the module. The colored wire on the ribbon cable indicates -12V.[24][25][26][27] Pins are numbered from pin 1 with even numbers along one side and the odd numbered ones along the other.[28]
Cwejman
Cwejman uses the same connectors as Doepfer, however +5V is unused. Also on 10 pin connectors the coloured wire indicates Gate and on 16 pin connectors it indicates +12V.[29]
Pin assignments with reference to the front panel for up, on the PCB component side pin 1 is the uppermost on the left:
Pins | Function |
---|---|
1,16 | Gate |
2,15 | CV |
3,14 | +5V (unused on Cwejman) |
4,13 | +12V |
5,6,7,10,11,12 | ground |
8,9 | -12V |
Suppliers:
- Unshrouded gold plated male PCB mount 2x8 pin headers (Rapid 50-8041)
- IDC female connector with strain relief 10 pin (Rapid 51-9587, 19-1017, Mouser 710-61201023021)
- IDC female connector with strain relief 16 pin (Rapid 51-9596, 519603, Mouser 710-61201623021)
An IDC crimping tool for the assembly of IDC connectors onto flat ribbon cable:
Ribbon cable:
Analogue Systems
Analogue Systems uses 16 pin DIL sockets (IC sockets, with two rows of 8 pins). All pins connect to the ribbon cable. The Doepfer and AS methods are not compatible without some sort of converter.[26]
Pin assignments:
Pins | Voltage |
---|---|
1,2,15,16 | +12V |
3,4,13,14 | +12V |
5,6,11,12 | +5V |
7,8,9,10 | -12V |
Suppliers:
- 16 pin IDC DIL plug (Rapid 80-0205)
- 16 pin turned pin IC socket (Rapid 22-1722
- Analogue Systems to Doepfer Adaptor
- Analogue Systems to Doepfer Reverse Adaptor
Power supplies
A good clean power supply unit (PSU) is the most important part of a modular system. A proper linear power supply and good distribution makes a big difference to the stability and sound quality of the system.[30]
Switch-mode power supplies (SMPS) are smaller, lighter, and much more efficient (give off less heat) than linear power supplies but produce noise, (above the audio range) on their output.[31] About 1% of the output voltage of a switching power is a sawtooth ripple at the switcher frequency. Due to the fast output switching and the parasitic inductance of the output filter capacitor there may also be short voltage spikes at the peaks of the sawtooth. Use low inductance capacitors with short leads to minimize these voltage spikes. Adding a small LC filter to the output can further reduce the ripple and transients to a tenth of their level.[32]
Safety
Mains voltages can kill and capacitors in disconnected power supplies can still deliver quite a jolt. Unless you're qualified to work with mains electricity ready made external transformers are safer.
See also
References
This page uses Creative Commons Licensed content from Mod Wiggler Wiki:vertical Mount Components (View authors).
This page has been split to Eurorack panel components on 22 April 2016. The history of this page serves as the attribution history for the contents of that page, before then.
- ^ Analogue Systems: Doepfer compatibility, Mod Wiggler forum, October 2009
- ^ Analogue Systems or Doepfer as 1st Modular system?, Electro-music.com forum, August 2009
- ^ a b c d e Some general questions on euro-designing by Graham Hinton, Mod Wiggler forum, October 2011
- ^ a b c Doepfer A-100 Construction Details
- ^ a b Aluminum Panel Guage???, Mod Wiggler forum, January 2012
- ^ a b confused about euro panel spec standard., Mod Wiggler forum, March 2012
- ^ Standard measurements in front panels, Electro-music.com forum, May 2007
- ^ Thomas Henry's SN76477 Super Controller Module by Matthias Herman, Electro-music.com forum, July 2007
- ^ a b c d Six jacks in euro, what is the preferred configuration?, Mod Wiggler forum, October 2014
- ^ a b Euro modules – Oval mounting holes, Mod Wiggler forum, December 2014
- ^ The Eurorack Charter?, Mod Wiggler forum, October 2012
- ^ TipTop Z-Rails dimensions
- ^ Schroff Rails for a Eurorack Rast?
- ^ "VectorPak T-Struts" (PDF). Archived from the original (PDF) on 2015-05-01. Retrieved 2015-05-22.
- ^ Why no talk of Analoge Systems modules?, Gearslutz.com forums, February 2013
- ^ a b Enclave cases rails..., Mod Wiggler forum, July 2014
- ^ a b [IC] 4U Single Function 'Sergesque' panels, Mod Wiggler forum, 13 December 2013
- ^ What type of aluminium is used for faceplates?, Mod Wiggler forum, June 2013
- ^ Sheet Metal (aluminium) UK, Mod Wiggler forum, January 2012
- ^ Plan B/Cliff Jacks, Mod Wiggler forum, September 2008
- ^ 3.5mm Vertical Mount Jacks, Erthenvar
- ^ a b c Hardware for stacked PCBs, Mod Wiggler forum
- ^ Molex Connectors Explained, as used in Pinball.
- ^ a b The Definitive Connecting Power Thread, Mod Wiggler forum, April 2010
- ^ Doepfer Technical Details A-100
- ^ a b Re: some help building a rack for doepfer by Tony Allgood, Analogue Heaven email list, 29 June 2006
- ^ Doepfer connectors?, Mod Wiggler forum, June 2011
- ^ "16 pin IDC male connector diagram and applications pinouts". Archived from the original on 2015-04-28. Retrieved 2015-05-22.
- ^ Cwejman ribbon cables
- ^ Best Eurorack Power Supply (PSU) for your buck?, Mod Wiggler forum, 23 Feb 2014
- ^ "Understanding the Importance of Low-Noise Linear Power Supplies" (PDF). Archived from the original (PDF) on 2012-12-19. Retrieved 2016-03-04.
- ^ Output voltage ripple and transients, LM2574 data sheet
External links
- GitHub, rahji/eurorack-ears, CAD drawings for Eurorack rails, ears/brackets
- The Eurorack Database – Eurorack DIY Resources
- DIY eurorack modules..., Mutable Instruments
- Analogue Systems power supply & Eurorack modular synth case
- Power Supplies, The Eurorack Database
- 3.5 mm mono sockets for vertical PCB mounting by Robin Whittle, Real World Interfaces, 2014
- About Aluminum, McMaster-Carr
- The big eurorack PSU list
Schematics, PCB overlays, BOMs and assembly instructions
Mod Wiggler forum
- Panel mounted controls vs PCB mounted controls, and more!, April 2012
- Potentiometers / Mouser, August 2011
- DIY euro case...rails?, December 2009
- The Pitfalls of Choosing Quality Brands of Components?, March 2014
Eurorack parts suppliers
- ModularSynthLab, Netherlands