Eurorack parts

Jack Sockets 3.5mm

To mount sockets and controls directly on the PCB, and to have the PCB parallel to the front panel you need specific vertical mount sockets.

Using a panel mount jack socket with a PCB mount

These are like rocking horse poo. Hard to find. Options include:

• TruConnect PJ-360 (stereo, no thread)
• Jalco YK21-5157 and variations. 10.5mm high versions and in mono, see Jalco website. No thread though.
• Cliff doepfer use these, what part number?
• PJ-301B see http://erthenvar.com/store/ (US)

http://www.qingpu-electronics.com/en/products/WQP-PJ3010BM-34.html

• WENZHOU QINGPU ELECTRONICS CO., LTD http://www.wqpelectronics.com/ProductShow.asp?ID=198

• Lumberg 1502 03 whilst it looks like a chassis socket with solder tags, this actually has a PCB template too Farnell

And harder to track down:

• QingPu Electronics and Lih Sheng look good. They supply to Digidesign and others:

http://www.qingpu-electronics.com/en/products/WQP-PJ3410-54.html http://ec.lihsheng.com.tw/catalog/product_info.php?cPath=38&products_id=88&osCsid=e0b00cd4936cedb4aa4292d1b59da566

Working with panel mount jack sockets

• Some products do a hack with jack sockets such as this one16PJ138. An example from the Piston Honda is shown on the right here. Mouser

Potentiometers and controllers

BI Tech 0915N in use by WMD on the Gamma Wave Source

• Recommended BI Technologies: 10.5mm high linear pots: http://www.bitechnologies.com/pdfs/p09x.pdf or on Mouser
• Bourns make a range including:
  • http://www.bourns.com/ProductFamily.aspx?name=potentiometers
    • PDB12-M, PCB mount, 9mm high, no thread, 12mm package
    • PTV09A-4
    • 3310Y series, 5mm deep with 6mm of thread so may be too low to be used easily: http://uk.farnell.com/bourns/3310-001-503l/potentiometer-50k/dp/9354000
    • PTV111-3 7.5mm high body, 5.0mm high bushing (that's 12.5mm so maybe good..) available with centre detent 12mm body, cheap.
  • Digital continuous encoders for microcontroller based products
• Vishay
  • P12 series 11mm to panel
  • P9 vertical mount 7mm high with 7mm bushing should be fine. http://www.vishay.com/docs/51047/p9.pdf but only good to 10V!