Ken Stone/1973 classic Serge/Serge positive slew

Jump to navigation Jump to search
Cgs serge positive slew panel.jpg

The following info on the 1973 variant of the Serge positive slew module is presented for educational/historic purposes only and are not to scale.


Construction

PCB pattern
Overlay and PCB pattern
Photo/overlay

PCB connections

  • A = VC (1)
  • B = input (1)
  • C = start (1)
  • D = sustain (1)
  • E = output (1)
  • F = pulse out + (1)
  • G = pulse out - (1)
  • H = VC (2)
  • I = input (2)
  • J = start (2)
  • K = sustain (2)
  • L = output (2)
  • N = pulse out + (2)
  • M = pulse out - (2)
  • U = not used (0v)
  • W = 0v
  • X = +12v
  • Y = +6v
  • Z = -12v

Please note that the F and G, and N and M outputs may be swapped (e.g. G to F). My original panel has the original labeling crossed out, and the locations swapped, but due to other wiring errors I cannot be certain if this was a constructor error, or a panel marking error.

CC-BY-NC

Readers are permitted to construct these circuits for their own personal use only. Serge Tcherepnin retains all rights to his work.

See also

References

External links