MOTM parts: Difference between revisions
(Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3) |
|||
(23 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
This information is for doing DIY, repaneling, and/or repairs on MOTM systems. It's not comprehensive, everyone has preferences, but lists the common/major/most-wanted parts in the MOTM format, and/or what sort of things will work. |
This information is for doing DIY, repaneling, and/or repairs on [[MOTM]] systems. It's not comprehensive, everyone has preferences, but lists the common/major/most-wanted parts in the MOTM format, and/or what sort of things will work. |
||
==Front panels== |
== Front panels == |
||
[[File:MOTM panel mounting.jpg|thumb|200px|Detail of a MOTM panel mounting.]] |
[[File:MOTM panel mounting.jpg|thumb|200px|Detail of a MOTM panel mounting.]] |
||
===Specifications=== |
=== Specifications === |
||
MOTM panels use U, the [[19-inch rack]] unit for height and width. The height is 5U (8.75"), while the widths are in multiples of 1U (1.75"), with some fraction less to allow for manufacturing tolerances. |
MOTM panels use U, the [[19-inch rack]] unit for height and width. The height is 5U (8.75"), while the widths are in multiples of 1U (1.75"), with some fraction less to allow for manufacturing tolerances. The finish is baked-on two part Polane paint,<ref>[https://www.modwiggler.com/forum/viewtopic.php?t=60156 Where to get MOTM-style silkscreened panels made?], Mod Wiggler forum, May 2012</ref> giving it a crinkly look, and with labeling and scales in screen printed epoxy-ink.<ref>[http://synthtech.com/motm/info/ MOTM Info]</ref> |
||
===Blank panels=== |
=== Blank panels === |
||
6061 aluminum alloy, T3 or T6 temper, is easy to come by, can be easily worked. Thickness usually ranges between 1.5 |
6061 aluminum alloy, T3 or T6 temper, is easy to come by, can be easily worked. Thickness usually ranges between 1.5 mm (0.62") and 2.5 mm (0.12") but see what is standard for the format, e.g. a thickness of 2.28 mm (0.09") for 4U.<ref>[https://www.modwiggler.com/forum/viewtopic.php?t=86107 What type of aluminium is used for faceplates?], Mod Wiggler forum, June 2013</ref><ref>[https://www.modwiggler.com/forum/viewtopic.php?t=51475 Aluminum Panel Guage???]</ref> |
||
Blank panels can be purchased from: |
Blank panels can be purchased from: |
||
*[http://bridechamber.com Bridechamber] 1, 2, 3, and 4U |
* [http://bridechamber.com/ Bridechamber] 1, 2, 3, and 4U |
||
*[http://www.synthtech.com Synthesis Technology] 1 and 2U |
* [http://www.synthtech.com/ Synthesis Technology] 1 and 2U |
||
===Project panels=== |
=== Project panels === |
||
Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from: |
Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from: |
||
*[http://bridechamber.com Bridechamber] |
* [http://bridechamber.com/ Bridechamber] |
||
===Custom panels=== |
=== Custom panels === |
||
Custom panels can be manufactured by: |
Custom panels can be manufactured by: |
||
*[http://www.bigbluewave.co.uk/resynthesis/resynthesis_home.htm Re:Synthesis], UK |
* [http://www.bigbluewave.co.uk/resynthesis/resynthesis_home.htm Re:Synthesis], UK |
||
*[http://www.frontpanelexpress.com Front Panel Express], USA |
* [http://www.frontpanelexpress.com/ Front Panel Express], USA |
||
*[http://www.schaeffer-ag.de Schaeffer], EU |
* [http://www.schaeffer-ag.de/ Schaeffer], EU |
||
==Panels |
== Panels components == |
||
Avoid cheap parts, especially if mechanical. Invest in quality, you always get what you pay for. Otherwise your entire system might later develop intermittent faults.<ref> |
Avoid cheap parts, especially if mechanical. Invest in quality, you always get what you pay for. Otherwise your entire system might later develop intermittent faults.<ref>Mod Wiggler forum:[https://www.modwiggler.com/forum/viewtopic.php?p=861269 On cheap parts...]</ref> |
||
===Knobs=== |
=== Knobs === |
||
MOTM uses ALCO PKES90B1/4 knobs, available at: |
MOTM uses ALCO PKES90B1/4 knobs, available at: |
||
*[http://www.synthtech.com Synthesis Technology] |
* [http://www.synthtech.com/ Synthesis Technology] |
||
===Potentiometers=== |
=== Potentiometers === |
||
MOTM uses Spectrol 149 pots, available at: |
MOTM uses Spectrol 149 pots, available at: |
||
*[http://www.synthtech.com Synthesis Technology] |
* [http://www.synthtech.com/ Synthesis Technology] |
||
===Switches=== |
=== Switches === |
||
NKK toggle switches with bat handles are the closest fit.<ref>Dave Bradley's [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]</ref> |
NKK toggle switches with bat handles are the closest fit.<ref>Dave Bradley's [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]</ref> |
||
*SPDT: NKK M2102ES1W01 (Allied: 870-8646) |
* SPDT: NKK M2102ES1W01 (Allied: 870-8646) |
||
*SPDT center off: NKK M2103ES1W01 (Allied: 870-8647) |
* SPDT center off: NKK M2103ES1W01 (Allied: 870-8647) |
||
*DPDT: NKK M2022ES1W01 (Allied: 870-8652) |
* DPDT: NKK M2022ES1W01 (Allied: 870-8652) |
||
*DPDT center off: NKK M2023ES1W01 (Allied: 870-8653) |
* DPDT center off: NKK M2023ES1W01 (Allied: 870-8653) |
||
===Jacks=== |
=== Jacks === |
||
MOTM uses Switchcraft 112A 1/4" jacks. |
MOTM uses Switchcraft 112A 1/4" jacks. |
||
===LEDs=== |
=== LEDs === |
||
MOTM uses |
MOTM uses 5 mm flat-lens LEDs. |
||
*Red: Lumex SSI-LXH387ID (DigiKey: 67-1155-ND) |
* Red: Lumex SSI-LXH387ID (DigiKey: 67-1155-ND) |
||
*Green: Lumex SSI-LXH387GD (DigiKey: 67-1156-ND) |
* Green: Lumex SSI-LXH387GD (DigiKey: 67-1156-ND) |
||
*Yellow: Lumex SSI-LXH387YD (DigiKey: 67-1157-ND) |
* Yellow: Lumex SSI-LXH387YD (DigiKey: 67-1157-ND) |
||
==PCB/Panel mounting== |
== PCB/Panel mounting == |
||
===PCB mounting=== |
=== PCB mounting === |
||
Most MOTM PCBs are about 4.5" by 5.5".<ref>[https://www. |
Most MOTM PCBs are about 4.5" by 5.5".<ref>[https://www.modwiggler.com/forum/viewtopic.php?t=71563 MOTM pcb in frac rack format?], Mod Wiggler forum, November 2012</ref> These are generally mounted perpendicular to the panel with [[stooge brackets]] affixed by the pots or jacks, available at: |
||
*[http://bridechamber.com/Brackets.html Bridechamber] |
* [http://bridechamber.com/Brackets.html Bridechamber] |
||
*[http://synthcube.com/cart/index.php?route=product |
* [https://web.archive.org/web/20180228193533/http://synthcube.com/cart/index.php?route=product%2Fsearch Synthcube] |
||
==Internal connectors== |
== Internal connectors == |
||
Do not mix dissimilar metal terminals and headers. The contact resistance will go up with dissimilar metals, causing all sorts of problems.<ref>[http://www.pinrepair.com/connect/ Molex Connectors Explained, as used in Pinball.]</ref> |
Do not mix dissimilar metal terminals and headers. The contact resistance will go up with dissimilar metals, causing all sorts of problems.<ref>[http://www.pinrepair.com/connect/ Molex Connectors Explained, as used in Pinball.]</ref> |
||
<!--The Molex KK crimp connector is used in synthesizers by [[CGS]], [[Cyndustries]], [[EFM]], [[Encore Electronics]], [[Metalbox]], [[Oakley Sound Systems]] and [[Synthesis Technology]].<ref>[http://search.retrosynth.com/synth-diy/search/lookit.cgi?-v0503.816 Re: [sdiy] Blacet/Paia power header part number?] by Cynthia Webster, 21 Mar 2005</ref> |
<!-- The Molex KK crimp connector is used in synthesizers by [[CGS]], [[Cyndustries]], [[EFM]], [[Encore Electronics]], [[Metalbox]], [[Oakley Sound Systems]] and [[Synthesis Technology]].<ref>[http://search.retrosynth.com/synth-diy/search/lookit.cgi?-v0503.816 Re: [sdiy] Blacet/Paia power header part number?] by Cynthia Webster, 21 Mar 2005</ref>--><!-- [[Connectors#5U]]-->===Power=== |
||
MOTM modules and power distribution boards are connected using 4-pin [[MTA]]-156 connectors and 18 awg wire.<ref name="mw1739"> |
MOTM modules and power distribution boards are connected using 4-pin [[MTA Connector]]-156 connectors and 18 awg wire.<ref name="mw1739">[https://www.modwiggler.com/forum/viewtopic.php?t=1739 Power distribution – updated], Mod Wiggler forum, Sep 2008</ref> Systems by [[Encore Electronics]] use 4 pin 0.156" [[Molex KK connector]] connectors, while those from [[Oakley Sound Systems]] use either MTA or Molex KK 0.156" connectors. |
||
{| class="wikitable" |
{| class="wikitable" |
||
!Pin!!Voltage |
!Pin!!Voltage |
||
Line 64: | Line 64: | ||
|4||-15 |
|4||-15 |
||
|} |
|} |
||
*Female cable mount: 640426-4 (Mouser: 571-640-4264) |
* Female cable mount: 640426-4 (Mouser: 571-640-4264) |
||
*Male PCB mount: 640445-4 (Mouser: 571-6404454) |
* Male PCB mount: 640445-4 (Mouser: 571-6404454) |
||
* [https://www.mouser.co.uk/ProductDetail/TE-Connectivity/644752-4?qs=ZDXmSm13591UQpdE9ubGWQ%3D%3D#.Wuyw9VR2OCE TE Connectivity 4 pin MTA 156 header] (Mouser: 571-6404454) |
|||
⚫ | |||
⚫ | |||
Oakley Sound Systems designs use either MTA-100 or Molex KK 0.1" for board interconnects.<ref>Oakley Sound Systems:[http://www.oakleysound.com/construct.pdf Construction Guide]</ref> |
Oakley Sound Systems designs use either MTA-100 or Molex KK 0.1" for board interconnects.<ref>Oakley Sound Systems:[http://www.oakleysound.com/construct.pdf Construction Guide]</ref> |
||
⚫ | |||
== |
== See also == |
||
* [[MU parts]] |
|||
== References == |
|||
⚫ | |||
{{reflist}} |
{{reflist}} |
||
*[ |
* [https://www.modwiggler.com/forum/viewtopic.php?t=36380&start=all&postdays=0&postorder=asc The 5U DIY Resource Wiki], Mod Wiggler forum |
||
== External links == |
== External links == |
||
* Dave Bradley's very extensive [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]. |
* Dave Bradley's very extensive [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]. |
||
Line 81: | Line 88: | ||
=== Schematics, PCB overlays, BOMs and assembly instructions === |
=== Schematics, PCB overlays, BOMs and assembly instructions === |
||
* [http://yusynth.net/index_en.php YuSynth] |
* [http://yusynth.net/index_en.php YuSynth] |
||
* [http://www.musicfromouterspace.com/ Music From Outer Space] |
* [https://web.archive.org/web/20060111050127/http://www.musicfromouterspace.com/ Music From Outer Space] |
||
* [http://cgs.synth.net/ CGS] |
* [https://web.archive.org/web/20170430151727/http://cgs.synth.net/ CGS] |
||
=== Stooge brackets === |
=== Stooge brackets === |
||
* [http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm PCB mounting brackets] |
* [https://web.archive.org/web/20101022002423/http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm PCB mounting brackets] |
||
* [http://www.synthtech.com/tech.html Detailed CAD drawings of MOTM parts/brackets]. |
* [http://www.synthtech.com/tech.html Detailed CAD drawings of MOTM parts/brackets]. |
||
Latest revision as of 18:35, 15 February 2023
This information is for doing DIY, repaneling, and/or repairs on MOTM systems. It's not comprehensive, everyone has preferences, but lists the common/major/most-wanted parts in the MOTM format, and/or what sort of things will work.
Front panels
Specifications
MOTM panels use U, the 19-inch rack unit for height and width. The height is 5U (8.75"), while the widths are in multiples of 1U (1.75"), with some fraction less to allow for manufacturing tolerances. The finish is baked-on two part Polane paint,[1] giving it a crinkly look, and with labeling and scales in screen printed epoxy-ink.[2]
Blank panels
6061 aluminum alloy, T3 or T6 temper, is easy to come by, can be easily worked. Thickness usually ranges between 1.5 mm (0.62") and 2.5 mm (0.12") but see what is standard for the format, e.g. a thickness of 2.28 mm (0.09") for 4U.[3][4]
Blank panels can be purchased from:
- Bridechamber 1, 2, 3, and 4U
- Synthesis Technology 1 and 2U
Project panels
Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from:
Custom panels
Custom panels can be manufactured by:
- Re:Synthesis, UK
- Front Panel Express, USA
- Schaeffer, EU
Panels components
Avoid cheap parts, especially if mechanical. Invest in quality, you always get what you pay for. Otherwise your entire system might later develop intermittent faults.[5]
Knobs
MOTM uses ALCO PKES90B1/4 knobs, available at:
Potentiometers
MOTM uses Spectrol 149 pots, available at:
Switches
NKK toggle switches with bat handles are the closest fit.[6]
- SPDT: NKK M2102ES1W01 (Allied: 870-8646)
- SPDT center off: NKK M2103ES1W01 (Allied: 870-8647)
- DPDT: NKK M2022ES1W01 (Allied: 870-8652)
- DPDT center off: NKK M2023ES1W01 (Allied: 870-8653)
Jacks
MOTM uses Switchcraft 112A 1/4" jacks.
LEDs
MOTM uses 5 mm flat-lens LEDs.
- Red: Lumex SSI-LXH387ID (DigiKey: 67-1155-ND)
- Green: Lumex SSI-LXH387GD (DigiKey: 67-1156-ND)
- Yellow: Lumex SSI-LXH387YD (DigiKey: 67-1157-ND)
PCB/Panel mounting
PCB mounting
Most MOTM PCBs are about 4.5" by 5.5".[7] These are generally mounted perpendicular to the panel with stooge brackets affixed by the pots or jacks, available at:
Internal connectors
Do not mix dissimilar metal terminals and headers. The contact resistance will go up with dissimilar metals, causing all sorts of problems.[8]
Power
MOTM modules and power distribution boards are connected using 4-pin MTA Connector-156 connectors and 18 awg wire.[9] Systems by Encore Electronics use 4 pin 0.156" Molex KK connector connectors, while those from Oakley Sound Systems use either MTA or Molex KK 0.156" connectors.
Pin | Voltage |
---|---|
1 | +15 |
2 | GND |
3 | GND |
4 | -15 |
- Female cable mount: 640426-4 (Mouser: 571-640-4264)
- Male PCB mount: 640445-4 (Mouser: 571-6404454)
- TE Connectivity 4 pin MTA 156 header (Mouser: 571-6404454)
Interconnections
Oakley Sound Systems designs use either MTA-100 or Molex KK 0.1" for board interconnects.[10]
See also
References
This page uses Creative Commons Licensed content from Mod Wiggler Wiki:MOTM DIY resources (View authors).
- ^ Where to get MOTM-style silkscreened panels made?, Mod Wiggler forum, May 2012
- ^ MOTM Info
- ^ What type of aluminium is used for faceplates?, Mod Wiggler forum, June 2013
- ^ Aluminum Panel Guage???
- ^ Mod Wiggler forum:On cheap parts...
- ^ Dave Bradley's Parts list and supplier index for typical MOTM hardware
- ^ MOTM pcb in frac rack format?, Mod Wiggler forum, November 2012
- ^ Molex Connectors Explained, as used in Pinball.
- ^ Power distribution – updated, Mod Wiggler forum, Sep 2008
- ^ Oakley Sound Systems:Construction Guide
- The 5U DIY Resource Wiki, Mod Wiggler forum
External links
- Dave Bradley's very extensive Parts list and supplier index for typical MOTM hardware.
- About Aluminum, McMaster-Carr
DIY builder sites
- Richard Brewster's Synthesizer
- Bill and Will's MOTM Analog Synthesizer
- Modular Synthesis, LLC:Parts and construction information