MOTM parts: Difference between revisions
No edit summary |
No edit summary |
||
Line 26: | Line 26: | ||
===Switches=== |
===Switches=== |
||
NKK toggle switches with bat handles are the closest fit.<ref>Dave Bradley's [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]</ref> |
NKK toggle switches with bat handles are the closest fit.<ref>Dave Bradley's [http://www.hotrodmotm.com/parts_list.htm Parts list and supplier index for typical MOTM hardware]</ref> |
||
*SPDT: NKK |
*SPDT: NKK M2102ES1W01 (Allied: 870-8646) |
||
*SPDT center off: NKK |
*SPDT center off: NKK M2103ES1W01 (Allied: 870-8647) |
||
*DPDT: NKK |
*DPDT: NKK M2022ES1W01 (Allied: 870-8652) |
||
*DPDT center off: NKK M2023ES1W01 (Allied: 870-8653) |
*DPDT center off: NKK M2023ES1W01 (Allied: 870-8653) |
||
===Jacks=== |
===Jacks=== |
||
Line 34: | Line 34: | ||
===LEDs=== |
===LEDs=== |
||
MOTM uses 5mm flat-lens LEDs. |
MOTM uses 5mm flat-lens LEDs. |
||
*Red: Lumex |
*Red: Lumex SSI-LXH387ID (DigiKey: 67-1155-ND) |
||
*Green: Lumex |
*Green: Lumex SSI-LXH387GD (DigiKey: 67-1156-ND) |
||
*Yellow: Lumex |
*Yellow: Lumex SSI-LXH387YD (DigiKey: 67-1157-ND) |
||
==PCB/Panel mounting== |
==PCB/Panel mounting== |
||
===PCB mounting=== |
===PCB mounting=== |
Revision as of 10:29, 27 August 2014
This is for doing DIY, repaneling, and/or repairs on MOTM systems. It's not comprehensive, everyone has preferences, but lists the common/major/most-wanted parts in the MOTM format, and/or what sort of things will work.
Panels/Faceplates
Specifications
...
Blank panels
Blank panels can be purchased from:
- Bridechamber 1, 2, 3, and 4U
- Synthesis Technology 1 and 2U
Project panels
Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from:
Custom panels
Custom panels can be manufactured by:
- The Beast
- Front Panel Express, USA
- Schaeffer, EU
Panels parts
Panel parts
A very extensive list can be found at Dave Bradley's Parts list and supplier index for typical MOTM hardware.
Knobs
MOTM uses ALCO PKES90B1/4 knobs, available at:
Potentiometers
MOTM uses Spectrol 149 pots, available at:
Switches
NKK toggle switches with bat handles are the closest fit.[1]
- SPDT: NKK M2102ES1W01 (Allied: 870-8646)
- SPDT center off: NKK M2103ES1W01 (Allied: 870-8647)
- DPDT: NKK M2022ES1W01 (Allied: 870-8652)
- DPDT center off: NKK M2023ES1W01 (Allied: 870-8653)
Jacks
MOTM uses Switchcraft 112A 1/4" jacks.
LEDs
MOTM uses 5mm flat-lens LEDs.
- Red: Lumex SSI-LXH387ID (DigiKey: 67-1155-ND)
- Green: Lumex SSI-LXH387GD (DigiKey: 67-1156-ND)
- Yellow: Lumex SSI-LXH387YD (DigiKey: 67-1157-ND)
PCB/Panel mounting
PCB mounting
MOTM PCBs are generally mounted perpendicular to the panel with stooge brackets affixed by pots or jacks, available at:
Internal connectors
Power
MOTM modules and power distribution boards are connected using 4-pin MTA-156 connectors and 18 awg wire.
Pinout
Pin | Voltage |
---|---|
1 | +15 |
2 | GND |
3 | GND |
4 | -15 |
- Female cable mount: 640426-4 (Mouser: 571-640-4264)
- Male PCB mount: 640445-4 (Mouser: 571-6404454)
External links
DIY builder sites
Stooge brackets
References
- ^ Dave Bradley's Parts list and supplier index for typical MOTM hardware