MOTM parts: Difference between revisions

Synthesizers.com and some 3rd party manufacturers mount the PCB parallel to the panel with standoffs. Other 3rd party manufacturers mount PCBs perpendicular MOTM-style. #4-40 mounting hardware is ideal, and works with CGS boards too.

PCBs can be mounted parallel using 1" (Mouser: 534-8405) and 1.25" (Mouser: 534-8407) threaded standoff posts.

Black oxide screws, like the ones used by Synthesizers.com, are used to affix the standoffs to the front panel. Specifically, #4-40 x 3/8" Black oxide phillips pan head screws. <ref>http://guitarfool.com/modules/hardware.html</ref>

Screws available here:

http://www.aaronsmachinescrews.com/cfusion/DisplayProduct.cfm?ITEM=1701SN1368

For perpendicular mounting, brackets as mentioned in the MOTM section can be used, or threaded right-angle brackets (Mouser: 534-621) can be mounted to the panel, using the same screws mentioned above. <ref>http://guitarfool.com/modules/hardware.html</ref>