2,250
edits
No edit summary |
No edit summary |
||
Line 84:
[[File:syncom6wayconn.jpg|thumb|right|250px|middle]]Synthesizers.com use a 6 pin connector to get power from the power supply to modules.[[File:syncom20harn.jpg|thumb|right|250px|middle]] Power is distributed from the power supply via a power harness which contains a number of these connectors. They sell 2 models: the small power harness has 20, the large has 40.
[[File:motm4pinconn.jpg|thumb|right|250px|middle]]MOTM Synthesis Technology use a 4 pin connector on most modules – those that only need +/- 15v. These are the same power connectors that Frac and Wiard 300 series module use. Some of the newer modules, that also require 5v, use the same type of connector but with 6 pins (not the same one as Synthesizers.com use). Power is distributed from the power supply via power distribution boards.[[File:motm960.jpg|thumb|right|250px|middle]][[File:
[[File:
==Distributing power to a mix of 5U formats==
|