Roland Alpha Juno 2: Difference between revisions
Jump to navigation
Jump to search
leaked caps
mNo edit summary |
(leaked caps) |
||
Line 4:
If then the bender has a hearable effect, but got stuck or moves to its middle very slowly, the cause can be a stuck axis of the pot. To solve this, open the hexagon screw again, and also other screws so you can disassemble the bender parts. Put a suitable contact spray (I've used WD40) onto the axis of the pot. Then turn the axis a minute or so back and forth until it's getting at least a bit more movable. After some hours the contact spray will become even more distributed by itself between the axis and the pot housing, and the pot will be easy movable.
== Leaked caps ==
In my case, there was cracking sound and suddenly no sound at all, because of leaked caps C11 and C12: They damaged the conductor beneath. The faulty caps had to be removed, the conductor patched with wire, and the caps replaced with same capacity and voltage (or higher voltage).
|