2,280
edits
mNo edit summary |
|||
Line 3:
Avoid cheap parts, especially if mechanical. Invest in quality, you always get what you pay for. Otherwise your entire system might later develop intermittent faults.<ref>[https://www.muffwiggler.com/forum/viewtopic.php?p=861269 On cheap parts...], Muff Wiggler forum, July 2012</ref><ref>[https://www.muffwiggler.com/forum/viewtopic.php?t=108045&start=all&postdays=0&postorder=asc The Pitfalls of Choosing Quality Brands of Components?], Muff Wiggler forum, March 2014</ref> Vertical mount front panel components will need to of a similar height to neatly fit the gap between the PCB and front panel.
In order to construct low profile/[[skiff]] friendly Eurorack modules
== Eurorack panel specifications ==
Line 68:
** [http://www.qingpu-electronics.com/en/products/WQP-PJ3410-54.html WQP-PJ3410], plastic bush
** [http://www.qingpu-electronics.com/en/products/WQP-PJ3010BM-34.html WQP-PJ3010BM], metal bush model with two ground lugs. PCB to panel gaps of 9.0 to 12.0 mm look feasible, with the lower values achieved by bending the four feet diagonally or at 90 degrees.
** [http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html WQP-PJ398SM], mono, alternative to Kobiconn 16PJ138, all PCB mount pins, with beryllium copper spring, supersedes the WQP-PJ301M, avoid routing traces or ground plane directly under the jack
** [http://www.qingpu-electronics.com/en/products/WQP-PJ366ST-364.html WQP-PJ366ST], stereo version of WQP-PJ398SM.
* Rapid:[http://www.rapidonline.com/cables-connectors/3-5mm-unswitched-stereo-vertical-jack-socket-20-1655 TruConnect PJ-360], stereo, unthreaded bush
|