XY controller
The XY controller is a joystick used on some synthesizers to simultaneously and independently control two parameters such as pitch bend and modulation.[1][2]
Moog 959 X-Y Controller
The Moog 959 X/Y controller consists of two audio taper AB type J 10K pots and voltage limiting resistors. When centered the pot is at zero volts and travel is about 15° to either side. Care is needed to set it up so that at full swing the power rails are not shorted. The rotational resistance of the pots dictate the feel of the stick. The shafts of the two pots are simply connected by one L bracket.[3]
 | This article is a stub. You can help the Synth DIY Wiki by expanding it. |
References
- ^ The studio musician's jargonbuster by Godric Wilkie, Musonix, 1997, ISBN 0951721429
- ^ The complete synthesizer - A comprehensive guide by David Crombie, Omnibus Press, 1986 ISBN 07119070134
- ^ XY controller build?, SDIY email list, Jan 2016
Further reading
- Synthesizer Basics by Dean Friedman, Amsco Music, 1985, ISBN 0825624096, p.63
External links
- X Y controller..., Moog Music Forum, February 2014
- Digisound 80, Keyboard Controller by Charles Blakey, ETI 1980
- Ken Stone's Joystick Controller
Suppliers
- ALPS Stick Controller RKJXK/RKJXV Series
- Tsubame Radio Co. Ultra Mini Joy Stick
- Mammoth Electronics Joysticks