Autodesk EAGLE
CadSoft EAGLE is commercial software for editing circuit schematics, PCB layouts and component libraries. It is available for Windows, Linux and OS X.[1]
Editions
The Light edition can be used for free, for non-profit or evaluation. This is limited to boards of 100 x 80 mm (4 x 3.2 inches), only top and bottom signal layers, and the schematic editor can only create one sheet. It can however Load, view and print drawings that exceed these limits.[2]
For a single user doing non-commercial editing of e.g. the most commonly used Eurocard size, would require the Hobbyist edition, which costs €140. This allows boards of 100 x 160 mm (4 x 6.4 inches), up to 99 sheets and up to 6 signal layers. For commercial use, with the same limitations the Standard edition costs €690.[3]
 | This article is a stub. You can help the Synth DIY Wiki by expanding it. |
References
External links
- CadSoft EAGLE homepage
- Wikipedia:EAGLE (program)
- PCB Design Eagle CadSoft user group
- FreeRouting, Eagle compatible free push & shove router
- the EAGLE Forum based on Usenet newsgroups
- Eagle Tutorials
- CadSoft Tutorials