Comparison of Eurorack DIY PSUs: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
No edit summary
No edit summary
Line 1: Line 1:
A good clean power supply unit (PSU) is the most important part of a modular system. A proper [[Power supply (linear)|linear power supply]] and good distribution makes a big difference to the stability and sound quality of the system.<ref>[https://www.muffwiggler.com/forum/viewtopic.php?p=1470018 Best Eurorack Power Supply (PSU) for your buck?], Muff Wiggler forum, 23 Feb 2014</ref> [[Power supply (switching)|Switch-mode power supplies]] are smaller, lighter, and much more efficient than linear power supplies but produce more noise on their output.<ref>[http://cp.literature.agilent.com/litweb/pdf/5990-3242EN.pdf Understanding the Importance of Low-Noise Linear Power Supplies]</ref>
A good clean power supply unit (PSU) is the most important part of a modular system. A proper [[Power supply (linear)|linear power supply]] and good distribution makes a big difference to the stability and sound quality of the system.<ref>[https://www.muffwiggler.com/forum/viewtopic.php?p=1470018 Best Eurorack Power Supply (PSU) for your buck?], Muff Wiggler forum, 23 Feb 2014</ref> [[Power supply (switching)|Switch-mode power supplies]] are smaller, lighter, and much more efficient than linear power supplies but produce more noise, (above audio range) on their output.<ref>[http://cp.literature.agilent.com/litweb/pdf/5990-3242EN.pdf Understanding the Importance of Low-Noise Linear Power Supplies]</ref>


=== Safety ===
=== Safety ===
Line 7: Line 7:
!Brand!!Model (& web page)!!Type!!Volts & Amps!!Transformer type!!Main components!!Distribution!!Licence!!Comments!!Further info
!Brand!!Model (& web page)!!Type!!Volts & Amps!!Transformer type!!Main components!!Distribution!!Licence!!Comments!!Further info
|-
|-
|[[Befaco]]||[http://www.befaco.org/en/tienda/power-bus-diy-kit/ Power bus DIY kit]||hybrid|| +/-12V @ 0.7A, 5V @ 0.3A||switched +/-15V unit||LM317TL, LM337TL, 78M05||regulators are on a bus with 14 headers||[https://creativecommons.org/licenses/by-sa/3.0/ CC-BY-SA]||Linear regulators supplied by switched +/-15V unit. Sold as PCB and components kit.||[http://www.befaco.org/en/fuente-alimentacion/ schematic, assy instructions, Eagle files]
|[[Befaco]]||[http://www.befaco.org/en/tienda/power-bus-diy-kit/ Power bus DIY kit]||hybrid|| +/-12V @ 0.7A, 5V @ 0.3A||internal switched +/-15V DC unit||LM317TL, LM337TL, 78M05||Regulators are on a bus with 14 headers||[https://creativecommons.org/licenses/by-sa/3.0/ CC-BY-SA]||Linear regulators supplied by switched +/-15V unit. Sold as PCB and components kit.||[http://www.befaco.org/en/fuente-alimentacion/ schematic, assy instructions, Eagle files]
|-
|-
|[[Clicks &amp; Clocks]]||[http://clicksclocks.de/tag/psu PSU]||linear||+/-12V @ 1.2A||toroidal mounted on PCB||LM317, LM337||separate bus with 14 headers||with permission of Doepfer||Modelled on [[Doepfer A-100]] PSU2||[http://www2.doepfer.de/?p=2806&lang=en A-100 Technical Details]
|[[Clicks &amp; Clocks]]||[http://clicksclocks.de/tag/psu PSU]||linear||+/-12V @ 1.2A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||With permission of Doepfer||Modelled on [[Doepfer A-100]] PSU2||[http://www2.doepfer.de/?p=2806&lang=en A-100 Technical Details]
|-
|-
|[[Dintree]]||[http://www.dintree.com/#D112 D112 Power Supply]||switching||+/-12V @ 0.625A, 5V @ 0.5A||external 12V DC brick||VBED15, 7805||12 headers on PSU PCB||for non-commercial use only||Uses ready made DC to DC converter||[http://www.dintree.com/#D112 schematic]
|[[Dintree]]||[http://www.dintree.com/#D112 D112 Power Supply]||switching||+/-12V @ 0.625A, 5V @ 0.5A||external 12V DC brick||VBED15, 7805||12 headers on PSU PCB||for non-commercial use only||Uses ready made DC to DC converter||[http://www.dintree.com/#D112 schematic]
|-
|-
|[[Eowave]]||[http://www.eowave.com/modules/diy-kits/diy-power-supply/ DIY PSU]||switching||+/-12V @ 1.5V, 5V @ 0.5A
|[[Eowave]]||[http://www.eowave.com/modules/diy-kits/diy-power-supply/ DIY PSU]||switching||+/-12V @ 1.5V, 5V @ 0.5A
||external 15V 4A DC brick||2xLM2576T, 7805||separate bus with 15 headers||proprietary||Sold as PCB and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=136240&start=0 Muff Wiggler forum]
||external 15V 4A DC brick||2xLM2576T, 7805||Separate bus with 15 headers||proprietary||Sold as PCB and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=136240&start=0 Muff Wiggler forum]
|-
|-
|[[Erica Synths]]||[http://www.ericasynths.lv/en/shop/diy/diy-kits-1/eurorack-bipolar-12v-psu-kit/ 12V bipolar 1.5A PSU] ||linear||+/-12V @ 1.5A||||||||||||[https://www.muffwiggler.com/forum/viewtopic.php?t=125684&start=all&postdays=0&postorder=asc Muff Wiggler forum]
|[[Erica Synths]]||[http://www.ericasynths.lv/en/shop/diy/diy-kits-1/eurorack-bipolar-12v-psu-kit/ 12V bipolar 1.5A PSU] ||linear||+/-12V @ 1.5A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||proprietary||PCB, hardware and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=125684&start=all&postdays=0&postorder=asc Muff Wiggler forum]
|-
|-
|[[Frequency Central]]||[http://www.frequencycentral.co.uk/?page_id=894 FC Power DIY]||linear||+/-12V @ 0.5A, 5V @ 0.1A||12V AC wall wart||||none||||PCB only||
|[[Frequency Central]]||[http://www.frequencycentral.co.uk/?page_id=894 FC Power DIY]||linear||+/-12V @ 0.5A, 5V @ 0.1A||12V AC wall wart||7812, 7912, 78L05||1 header or solder pads||||PCB only. Inexpensive solution for small Euro system.||[http://www.frequencycentral.co.uk/wp-content/uploads/2013/02/FC-Power-Build-Doc.pdf FC Power Build Doc]
|-
|-
|[[L-1]]||[http://l-1.su/Power.html 12V bipolar linear PSU+busboards]||linear||+/-12V @ 1.5A||||||includes 5V regulator||||||
|[[L-1]]||[http://l-1.su/Power.html 12V bipolar linear PSU+busboards]||linear||+/-12V @ 1.5A||||||Includes 5V regulator||||||
|-
|-
|[[MFOS]]||[http://www.musicfromouterspace.com/analogsynth_new/POWERSUPPLY2009/POWERSUPPLY2009.php Adjustable LM317/LM337 1.5A Supply]||linear||+/-12V @ 1.5A||||||||||||
|[[MFOS]]||[http://www.musicfromouterspace.com/analogsynth_new/POWERSUPPLY2009/POWERSUPPLY2009.php Adjustable LM317/LM337 1.5A Supply]||linear||+/-12V @ 1.5A||||||||||||
Line 26: Line 26:
|MFOS||[http://www.musicfromouterspace.com/analogsynth_new/WALLWARTSUPPLY/WALLWARTSUPPLY.php Wall Wart Power Supply]||linear||+12V @ 1A||||||||||||
|MFOS||[http://www.musicfromouterspace.com/analogsynth_new/WALLWARTSUPPLY/WALLWARTSUPPLY.php Wall Wart Power Supply]||linear||+12V @ 1A||||||||||||
|-
|-
|[[stroh]]||[http://synthcube.com/cart/index.php?route=product/product&product_id=590 modular power supply]||||||||||||||||[https://www.muffwiggler.com/forum/viewtopic.php?t=97492&start=all&postdays=0&postorder=asc Muff Wiggler forum]
|[[stroh]]||[http://synthcube.com/cart/index.php?route=product/product&product_id=590 modular power supply]||linear||<!--+/-12V @ 1.5A, 5V @ 1.5A-->||toroidal mounted on PCB||LM317T,LM337T,LM1086||Detachable 2"x6" 12 header board with 5x10-pin Euro, 4x16-pin Euro, 8x6-pin Dotcom/MU and 8xMOTM/Frac headers.
||||PCB only and full kit.||[https://www.muffwiggler.com/forum/viewtopic.php?t=97492&start=all&postdays=0&postorder=asc Muff Wiggler forum]
|-
|-
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/deluxe-power/ Deluxe Power Module]||linear||||||||||||||
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/deluxe-power/ Deluxe Power Module]||linear||||||||||||||

Revision as of 17:06, 31 March 2016

A good clean power supply unit (PSU) is the most important part of a modular system. A proper linear power supply and good distribution makes a big difference to the stability and sound quality of the system.[1] Switch-mode power supplies are smaller, lighter, and much more efficient than linear power supplies but produce more noise, (above audio range) on their output.[2]

Safety

Mains voltages can kill and capacitors in disconnected power supplies can still deliver quite a jolt. Unless you're qualified to work with mains electricity, ready made external transformers are safer.

Brand Model (& web page) Type Volts & Amps Transformer type Main components Distribution Licence Comments Further info
Befaco Power bus DIY kit hybrid +/-12V @ 0.7A, 5V @ 0.3A internal switched +/-15V DC unit LM317TL, LM337TL, 78M05 Regulators are on a bus with 14 headers CC-BY-SA Linear regulators supplied by switched +/-15V unit. Sold as PCB and components kit. schematic, assy instructions, Eagle files
Clicks & Clocks PSU linear +/-12V @ 1.2A toroidal attached to PCB LM317, LM337 Separate bus with 14 headers With permission of Doepfer Modelled on Doepfer A-100 PSU2 A-100 Technical Details
Dintree D112 Power Supply switching +/-12V @ 0.625A, 5V @ 0.5A external 12V DC brick VBED15, 7805 12 headers on PSU PCB for non-commercial use only Uses ready made DC to DC converter schematic
Eowave DIY PSU switching +/-12V @ 1.5V, 5V @ 0.5A external 15V 4A DC brick 2xLM2576T, 7805 Separate bus with 15 headers proprietary Sold as PCB and components kit Muff Wiggler forum
Erica Synths 12V bipolar 1.5A PSU  linear +/-12V @ 1.5A toroidal attached to PCB LM317, LM337 Separate bus with 14 headers proprietary PCB, hardware and components kit Muff Wiggler forum
Frequency Central FC Power DIY linear +/-12V @ 0.5A, 5V @ 0.1A 12V AC wall wart 7812, 7912, 78L05 1 header or solder pads PCB only. Inexpensive solution for small Euro system. FC Power Build Doc
L-1 12V bipolar linear PSU+busboards linear +/-12V @ 1.5A Includes 5V regulator
MFOS Adjustable LM317/LM337 1.5A Supply linear +/-12V @ 1.5A
MFOS Wall Wart Power Supply linear +12V @ 1A
stroh modular power supply linear toroidal mounted on PCB LM317T,LM337T,LM1086 Detachable 2"x6" 12 header board with 5x10-pin Euro, 4x16-pin Euro, 8x6-pin Dotcom/MU and 8xMOTM/Frac headers. PCB only and full kit. Muff Wiggler forum
Synthrotek Deluxe Power Module linear
Synthrotek Eurorack 5A Power Supply linear +12V @ 2.2A, -12V @ 1.3A, +5V @ 1.5A

References

External links