Comparison of Eurorack DIY PSUs: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
(external DC bricks are switched) |
||
Line 7: | Line 7: | ||
!Brand!!Model (& web page)!!Type!!Volts & max. Amps!!Transformer type!!Main components!!Distribution!!Licence!!Comments!!Further info |
!Brand!!Model (& web page)!!Type!!Volts & max. Amps!!Transformer type!!Main components!!Distribution!!Licence!!Comments!!Further info |
||
|- |
|- |
||
|[[Befaco]]||[http://www.befaco.org/en/tienda/power-bus-diy-kit/ Power bus DIY kit]|| |
|[[Befaco]]||[http://www.befaco.org/en/tienda/power-bus-diy-kit/ Power bus DIY kit]||linear|| +/-12V @ 0.7A, 5V @ 0.3A||internal switched PS +/-15V DC unit||LM317TL, LM337TL, 78M05||Regulators are on a bus with 14 headers||[https://creativecommons.org/licenses/by-sa/3.0/ CC-BY-SA]||Sold as PCB and components kit.||[http://www.befaco.org/en/fuente-alimentacion/ schematic, assy instructions, Eagle files] |
||
|- |
|- |
||
|[[Clicks & Clocks]]||[http://clicksclocks.de/tag/psu PSU]||linear||+/-12V @ 1.2A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||With permission of Doepfer||Modelled on [[Doepfer A-100]] PSU2||[http://www2.doepfer.de/?p=2806&lang=en A-100 Technical Details] |
|[[Clicks & Clocks]]||[http://clicksclocks.de/tag/psu PSU]||linear||+/-12V @ 1.2A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||With permission of Doepfer||Modelled on [[Doepfer A-100]] PSU2||[http://www2.doepfer.de/?p=2806&lang=en A-100 Technical Details] |
||
|- |
|- |
||
|[[Dintree]]||[http://www.dintree.com/#D112 D112 Power Supply]||switching||+/-12V @ 0.625A, 5V @ 0.5A||external 12V DC brick||VBED15, 7805||12 headers on PSU PCB||for non-commercial use only||Uses ready made DC to DC converter||[http://www.dintree.com/#D112 schematic] |
|[[Dintree]]||[http://www.dintree.com/#D112 D112 Power Supply]||switching||+/-12V @ 0.625A, 5V @ 0.5A||external 12V DC switched brick||VBED15, 7805||12 headers on PSU PCB||for non-commercial use only||Uses ready made DC to DC converter||[http://www.dintree.com/#D112 schematic] |
||
|- |
|- |
||
|[[EFM Synthesizers]]||[http://www.modular.fonik.de/files/EFMforum/orgEFMfiles/3500er/3501_PSU.pdf 3501 Power Supply]||linear||+/-12V @ 1.5A||external transformer||LM317, LM337||can be adapted||unknown|||| |
|[[EFM Synthesizers]]||[http://www.modular.fonik.de/files/EFMforum/orgEFMfiles/3500er/3501_PSU.pdf 3501 Power Supply]||linear||+/-12V @ 1.5A||external transformer||LM317, LM337||can be adapted||unknown|||| |
||
|- |
|- |
||
|[[Eowave]]||[http://www.eowave.com/modules/diy-kits/diy-power-supply/ DIY PSU]||switching||+12V @ 1.5V, -12V @ 0.7A,<ref>[http://www.mouser.com/ds/2/405/lm2576-405253.pdf LM2576/LM2576HV Series SIMPLE SWITCHER® 3A Step-Down Voltage Regulator], p.20</ref> 5V @ 0.5A |
|[[Eowave]]||[http://www.eowave.com/modules/diy-kits/diy-power-supply/ DIY PSU]||switching||+12V @ 1.5V, -12V @ 0.7A,<ref>[http://www.mouser.com/ds/2/405/lm2576-405253.pdf LM2576/LM2576HV Series SIMPLE SWITCHER® 3A Step-Down Voltage Regulator], p.20</ref> 5V @ 0.5A |
||
||external 15V 4A DC brick||2xLM2576T, 7805||Separate bus with 15 headers||proprietary||Sold as PCB and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=136240&start=0 Muff Wiggler forum] |
||external 15V 4A DC switched brick||2xLM2576T, 7805||Separate bus with 15 headers||proprietary||Sold as PCB and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=136240&start=0 Muff Wiggler forum] |
||
|- |
|- |
||
|[[Erica Synths]]||[http://www.ericasynths.lv/en/shop/diy/diy-kits-1/eurorack-bipolar-12v-psu-kit/ 12V bipolar 1.5A PSU] ||linear||+/-12V @ 1.5A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||proprietary||PCB, hardware and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=125684&start=all&postdays=0&postorder=asc Muff Wiggler forum] |
|[[Erica Synths]]||[http://www.ericasynths.lv/en/shop/diy/diy-kits-1/eurorack-bipolar-12v-psu-kit/ 12V bipolar 1.5A PSU] ||linear||+/-12V @ 1.5A||toroidal attached to PCB||LM317, LM337||Separate bus with 14 headers||proprietary||PCB, hardware and components kit||[https://www.muffwiggler.com/forum/viewtopic.php?t=125684&start=all&postdays=0&postorder=asc Muff Wiggler forum] |
||
Line 35: | Line 35: | ||
||unknown||PCB only or full kit.||[https://www.muffwiggler.com/forum/viewtopic.php?t=97492&start=all&postdays=0&postorder=asc Muff Wiggler forum] |
||unknown||PCB only or full kit.||[https://www.muffwiggler.com/forum/viewtopic.php?t=97492&start=all&postdays=0&postorder=asc Muff Wiggler forum] |
||
|- |
|- |
||
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/deluxe-power/ Deluxe Power Module]||switching||+12 @ 2.0A, -12 @ 1.5A, +5 @ 1.5A||external 15-28V DC power brick||R-6212P, R-7312P, OKI-78SR-5/1.5-W36-C||1 or 2 flying bus cables||unknown||PCB only or full kit.|| |
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/deluxe-power/ Deluxe Power Module]||switching||+12 @ 2.0A, -12 @ 1.5A, +5 @ 1.5A||external 15-28V DC power switched brick||R-6212P, R-7312P, OKI-78SR-5/1.5-W36-C||1 or 2 flying bus cables||unknown||PCB only or full kit.|| |
||
|- |
|- |
||
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/eurorack-power-distribution-boards/ Eurorack 5A Power Supply]||switching||+12V @ 2.2A, -12V @ 1.3A, +5V @ 1.5A||external 12V DC power brick||UEI15-120-Q12P-C, OKI-78SR-5/1.5-W36-C||flying bus cable||unknown||PCB only or full kit.|| |
|Synthrotek||[http://www.synthrotek.com/products/modular-circuits/eurorack-power-distribution-boards/ Eurorack 5A Power Supply]||switching||+12V @ 2.2A, -12V @ 1.3A, +5V @ 1.5A||external 12V DC power switched brick||UEI15-120-Q12P-C, OKI-78SR-5/1.5-W36-C||flying bus cable||unknown||PCB only or full kit.|| |
||
|} |
|} |
||
Revision as of 18:47, 1 April 2016
A good clean power supply unit (PSU) is the most important part of a modular system. A proper linear power supply and good distribution makes a big difference to the stability and sound quality of the system.[1] Switch-mode power supplies are smaller, lighter, and much more efficient than linear power supplies but produce more noise, (above audio range) on their output.[2]
Safety
Mains voltages can kill and capacitors in disconnected power supplies can still deliver quite a jolt. Unless you're qualified to work with mains electricity, ready made external transformers are safer.
Brand | Model (& web page) | Type | Volts & max. Amps | Transformer type | Main components | Distribution | Licence | Comments | Further info |
---|---|---|---|---|---|---|---|---|---|
Befaco | Power bus DIY kit | linear | +/-12V @ 0.7A, 5V @ 0.3A | internal switched PS +/-15V DC unit | LM317TL, LM337TL, 78M05 | Regulators are on a bus with 14 headers | CC-BY-SA | Sold as PCB and components kit. | schematic, assy instructions, Eagle files |
Clicks & Clocks | PSU | linear | +/-12V @ 1.2A | toroidal attached to PCB | LM317, LM337 | Separate bus with 14 headers | With permission of Doepfer | Modelled on Doepfer A-100 PSU2 | A-100 Technical Details |
Dintree | D112 Power Supply | switching | +/-12V @ 0.625A, 5V @ 0.5A | external 12V DC switched brick | VBED15, 7805 | 12 headers on PSU PCB | for non-commercial use only | Uses ready made DC to DC converter | schematic |
EFM Synthesizers | 3501 Power Supply | linear | +/-12V @ 1.5A | external transformer | LM317, LM337 | can be adapted | unknown | ||
Eowave | DIY PSU | switching | +12V @ 1.5V, -12V @ 0.7A,[3] 5V @ 0.5A | external 15V 4A DC switched brick | 2xLM2576T, 7805 | Separate bus with 15 headers | proprietary | Sold as PCB and components kit | Muff Wiggler forum |
Erica Synths | 12V bipolar 1.5A PSU | linear | +/-12V @ 1.5A | toroidal attached to PCB | LM317, LM337 | Separate bus with 14 headers | proprietary | PCB, hardware and components kit | Muff Wiggler forum |
Frequency Central | FC Power DIY | linear | +/-12V @ 0.5A, 5V @ 0.1A | 12V AC wall wart | 7812, 7912, 78L05 | 1 header or solder leads to PCB | unknown | PCB only. Inexpensive solution for small Euro system. | FC Power Build Doc |
L-1 | 12V bipolar linear PSU+busboards | linear | +/-12V @ 1.5A | toroidal attached to PCB | 2xLD1084, 7805 | Two 12 header bus PCBs with kit. +5V regulator mounted on bus off 12V rail | unknown | Full kit for PSU + two busboards | Muff Wiggler forum |
MFOS | Adjustable LM317/LM337 1.5A Supply | linear | +/-12V @ 1.5A | separate transformer | LM317, LM337 | not specified | free for non-commercial use | PCB or PCB and components | |
MFOS | Wall Wart Power Supply | linear | +12V @ 1A | external AC wall wart | LM78XX/LM79XX or LM78LXX/LM79LXX | not specified | free for non-commercial use | PCB or PCB and components | |
ModularSynth.ru | Low-Cost PSU | linear | +/-12V @ 1A, 5V @ 0.5A | AC wall wart/separate transformer | 7812, 7912, 78L05 | not specified | CC-BY-NC-SA | ||
ModularSynth.ru | Regulated Bipolar PSU | linear | +/-12V @ 1.5A, 5V @ 1.5A | separate transformer | 2xLM317, LM337 | not specified | CC-BY-NC-SA | ||
stroh | modular power supply | linear | +/-12V , 5V | toroidal mounted on PCB | LM317T,LM337T,LM1086 | Detachable 2"x6" 12 header board with 5x10-pin Euro, 4x16-pin Euro, 8x6-pin Dotcom/MU and 8xMOTM/Frac headers. | unknown | PCB only or full kit. | Muff Wiggler forum |
Synthrotek | Deluxe Power Module | switching | +12 @ 2.0A, -12 @ 1.5A, +5 @ 1.5A | external 15-28V DC power switched brick | R-6212P, R-7312P, OKI-78SR-5/1.5-W36-C | 1 or 2 flying bus cables | unknown | PCB only or full kit. | |
Synthrotek | Eurorack 5A Power Supply | switching | +12V @ 2.2A, -12V @ 1.3A, +5V @ 1.5A | external 12V DC power switched brick | UEI15-120-Q12P-C, OKI-78SR-5/1.5-W36-C | flying bus cable | unknown | PCB only or full kit. |
References
External links
- Linear Power Supplies!, Muff Wiggler forum, Jun. 2013
- Power supply battle: TipTop,Elby,Doepfer,MakeNoise,4ms etc, Muff Wiggler forum, Oct. 2013
- Best Eurorack Power Supply (PSU) for your buck?, Muff Wiggler forum, Feb. 2014
- New Doepfer Power Supply A-100PSU3, Muff Wiggler forum, Oct. 2015
- The big eurorack PSU list, for a wider comparison both DIY and ready made