Roland Alpha Juno 2: Difference between revisions

[[File:Bender mounting.jpg|alt=mod-wheel assembly|thumb|mod-wheel assembly]]

If then the bender has a hearable effect, but got stuck or moves to its middle very slowly, the cause can be a stuck axis of the pot. To solve this, open the hexagon screw again, and also other screws so you can disassemble the bender parts. Put a suitable contact spray (I've used WD40) onto the axis of the pot. Then turn the axis a minute or so back and forth until it's getting at least a bit more movable. After some hours the contact spray will become even more distributed by itself between the axis and the pot housing, and the pot will be easy movable.