2,292
edits
m (added Category:Repairs using HotCat) |
m (removed Category:Repairs; added Category:Instrument repairs using HotCat) |
||
Line 4:
If then the bender has a hearable effect, but got stuck or moves to its middle very slowly, the cause can be a stuck axis of the pot. To solve this, open the hexagon screw again, and also other screws so you can disassemble the bender parts. Put a suitable contact spray (I've used WD40) onto the axis of the pot. Then turn the axis a minute or so back and forth until it's getting at least a bit more movable. After some hours the contact spray will become even more distributed by itself between the axis and the pot housing, and the pot will be easy movable.
[[Category:
|