2,273
edits
m (→Stacked PCBs) |
|||
Line 93:
=== Stacked PCBs ===
Stacked PCBs can be connected with standard 0.1" single and double row male/female [[pin
Don't use tools you value highly, the headers are made of brittle glass filled epoxy which will damage the edge of any blades used to cut it. To get the single row male headers to length, grip the last pin of the length you want firmly in pliers and snap the rest off. The female headers don't snap easily so first pull the pins out of the body at the point where you want it to snap, then file the ends smooth. Alternately combine smaller lengths to make up the length required. To get them to butt against each other at 0.1" if there is extra plastic on the ends file it down.<ref name="hw" />
Line 101:
* [http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/929834-01-36/?qs=QV10cN0MjFtGMxJSq6rXkQ%3D%3D 517-834-01-36], Mouser male 2.54mm pin header, 36 way, tin plated copper
* [http://www.mouser.com/ProductDetail/Harwin/R30-1001102/?qs=%2fha2pyFaduh3QY4G1og6YGrzdLjrFnZGRQnWZYca8amFflum8SkGQA%3d%3d 855-R30-1001102], Mouser M3x11mm hex spacer. Fit to the PCB with M3x5mm machine screws.
== Internal connectors ==
=== Power connectors ===
|