Talk:Eurorack parts

Revision as of 00:10, 24 December 2020 by Rob Kam (talk | contribs) (Rob Kam moved page Talk:Eurorack DIY parts to Talk:Eurorack parts without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Oval holes

To my knowledge the “oval holes” are actually meant to be double-D holes. They were originally used in the Eurocard rack-cases to take plastic or metal screw holders which would snap into them. If so they would have nothing to do with non-standard panel widths or different modular standards. The distance of the mounting holes is clearly defined, the tolerances of panel widths just depend on the manufacturers capability. -- [sdiy] Parts going out of module panel, Matthias Herrmann, 9 May 2018.

Retrieved from "https://sdiy.info/wiki/Talk:Eurorack_parts?oldid=13322"