Search results
Jump to navigation
Jump to search
- ...ugh the PCB so they are just long enough to reach the other side. Once the header is soldered to the PCB, the carrier strip can be carefully clipped off as i ...wire of an appropriate gauge. This option will not be as rigid as using a header. ...6 KB (938 words) - 18:45, 19 July 2022
- ...||linear||+/-12V @ 0.5A, 5V @ 0.1A||12V AC wall wart||7812, 7912, 78L05||1 header or solder leads to PCB||||PCB only. Inexpensive solution for small Euro sys ...]||linear||+/-12V @ 1.5A||toroidal attached to PCB||2xLD1084, 7805||Two 12 header bus PCBs with kit. +5V regulator mounted on bus off 12V rail||||Full kit fo ...9 KB (1,299 words) - 19:09, 19 December 2022
- ...entification. Power connections for +5 volts and 0 volts are also via this header. | 4 pin header||align=right|1 ...30 KB (4,931 words) - 18:41, 19 July 2022
- ...ugh the PCB so they are just long enough to reach the other side. Once the header is soldered to the PCB, the carrier strip can be carefully clipped off as i ...wire of an appropriate gauge. This option will not be as rigid as using a header. ...7 KB (1,278 words) - 18:45, 19 July 2022
- | 16 pin dual 0.1 header||align=right|1 | 5 pin 90 degree 0.1 header||align=right|1 ...10 KB (1,663 words) - 14:50, 19 July 2022
- | {{font color|#cc3333|(WAVE DSP on CGS02)}}||This header allows easy connection of a numeric display to indicate which wave has been | J2 (v1 and v2 boards only)||This header allows easy connection of a numeric display to indicate which bank has been ...12 KB (2,094 words) - 18:41, 19 July 2022
- ...that uses the MOTM standard for +/-15/+5, you can install a six pin 0.156 header, three Ferrite beads and three 10uF decoupling capacitors. ...ly have +/-12 volt or +/-15 volt power available, install a four pin 0.156 header, two Ferrite beads, two 10uF decoupling capacitors, two 100n capacitors and ...4 KB (689 words) - 18:44, 19 July 2022
- | 90° 5 pin header||align=right|1 | 90° 6 pin header||align=right|1 ...9 KB (1,450 words) - 19:17, 19 December 2022
- ...7nQflo5OWeXTtG8NqxhFQ%3D%3D 517-929974-01-36-RK], Mouser female 2.54mm pin header, 36 way, tin plated copper ...36/?qs=QV10cN0MjFtGMxJSq6rXkQ%3D%3D 517-834-01-36], Mouser male 2.54mm pin header, 36 way, tin plated copper ...25 KB (3,745 words) - 22:07, 16 March 2023
- ...|thumb|right|300px|Crimps, KF2510 (aka Molex KK 254) 4 pin housing and PCB header]] ...ps://www.taydaelectronics.com/wafer-connector-2-54mm-4-pins.html 4 pin PCB header] ...13 KB (1,643 words) - 18:43, 7 April 2024
- ...ynth-diy/search/lookit.cgi?-v0503.816 Re: [sdiy] Blacet/Paia power header part number?] by Cynthia Webster, 21 Mar 2005</ref> ...t they are not the same. Do not try an force a Molex KK housing onto a MTA header or vice versa.<ref name="oakley">Oakley Sound Systems, [http://www.oakleyso ...3 KB (405 words) - 16:55, 9 April 2024
- [[File:2x5 pin shrouded header.jpg|thumb|right|200px|2x5 pin shrouded header]] ...that matching connections will be made at either end. Even with [[shrouded header]]s don't plug the cable in because it fits, always first ensure the correct ...8 KB (1,178 words) - 16:41, 9 April 2024
- If using a boxed header for the power connection, it will need a little filing so it clears the lea ...S93, the box headers have identical pinouts and are in parallel. The lower header on the CGS98 is a standard Euro power connector.]] ...6 KB (1,094 words) - 18:44, 19 July 2022
- || box header''16 pin dual row'' || MTA-156 header ''4 pin'' ...9 KB (1,397 words) - 18:55, 19 July 2022
- | 16 pin dual row header for power||align=right|(1) | 16 pin dual row header and connector||align=right|1 ...8 KB (1,358 words) - 18:27, 15 February 2023
- ...mm) apart. The jumper fits over and shorts together pins on a [[pin header|header]] fitted to the [[PCB]]. It acts as a low-cost substitute for a switch, whe ...964 bytes (128 words) - 17:54, 18 July 2020
- ...ynth-diy/search/lookit.cgi?-v0503.816 Re: [sdiy] Blacet/Paia power header part number?] by Cynthia Webster, 21 Mar 2005</ref>--><!-- [[Connectors#5U] ...qs=ZDXmSm13591UQpdE9ubGWQ%3D%3D#.Wuyw9VR2OCE TE Connectivity 4 pin MTA 156 header] (Mouser: 571-6404454) ...7 KB (932 words) - 18:35, 15 February 2023
- ...the headers correct. It is intended that power is fed to this board via a header, though if you wish, wires could be soldered to the tracks on the back of t | 4 or 6 pin 0.156" header||align=right|10 ...2 KB (346 words) - 19:51, 19 December 2022
- [[File:cgs_photo_cgs72_01.jpg|thumb|center|236px|Standard 0.1 header jumpers as used in computers etc.. When the boards are pushed up against ea | 28 pin dual row 0.1 header||align=right|1 ...2 KB (296 words) - 18:43, 19 July 2022
- ...7nQflo5OWeXTtG8NqxhFQ%3D%3D 517-929974-01-36-RK], Mouser female 2.54mm pin header, 36 way, tin plated copper ...36/?qs=QV10cN0MjFtGMxJSq6rXkQ%3D%3D 517-834-01-36], Mouser male 2.54mm pin header, 36 way, tin plated copper ...22 KB (3,427 words) - 19:09, 19 December 2022